50W 1-6Pack Remote Control Light Lamp Socket E26/E27 Screw Wireless Holder Bulb Cap Smart Switch with Timing Function Light New

Remote Control Light Lamp Socket E26/E27 Screw Wireless Holder Bulb Cap Smart Switch with Timing Function 50m Long Distance Control Max Load 50W 1-6Pack

Description:

Features:

* E26/E27 Bulb Base Adapter with Hand Remote: Made of flame-retardant PC, safe and durable.Remotely turn on/off lamp socket holder ceiling lights, plug-in pendant, standing floor lamps, table top lamps, bedside and hard-to-reach lights with a push of a hand remote switch (Applicable bulb: E27 resistance-capacitance LED Bulb,Do not use high-power heating bulbs or incandescent lamps,max 50W )

* Power-off Memory Function : Wireless remote control E26/E27 lamp holder socket adapter 15 minutes, 30 minutes, and 60 minutes can be set to turn off automatically. With power-off memory function （Please refer remote control instructions：If the connection is not bright, it may be because the code value is messy, please press and hold the code button for 3 seconds within 5 seconds of power on to re-code ）

* Energy Saving Remote Lighting Fixtures: Remotely turn off the operate lights easily by just pushing a button to save energy; eliminate power wasting and save your money

* Long Range Signal : Remote control range 5-20m /16.4-66 FT Strong signal works through walls and doors without any interference; remote control lamps for bedroom, living room, basement and do not need to be in the line of sight

Specification:

Remote control range: 5-20m /16.4-66 FT

Timing: 15 minutes, 30 minutes, and 60 minutes can be set to turn off automatically.

With power-off memory function

Bulb Power: Power is not greater than 50W

Working voltage: AC110V/AC220V

Code Matching Mode : Code matching

Remote Control Battery: 2XAAA Battery-Not included

NOTE:

1，Do not use high-power heating bulbs or incandescent lamps

2，Do not use this product with excessive 50W power

3, If the connection is not bright, it may be because the code value is messy, please press and hold the code button for 3 seconds within 5 seconds of power on to re-code.

Package included:

1X Lamp Socket Holder

1X Remote Control(Battery Not included)