0 Piece,Product Price: US $ 0
Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Good news!!!:
For the first 10 orders, we will present 50pcs 6inch 55mic plastic film.
The value of the gift is 5.86 USD.
Cold Mounting Thermoplastic Film Pressing Machine
Product size: 333*140*60mm
Color classification: see SKU chart
Overglue speed: 300mm/min
Feed width: 240mm
Overplastic thickness: 0.5mm
Film thickness: 50mic-125mic
Applicable voltage: AC220-240V
Working power: 60W0.4A
Start-up power: 600W2.6A
Product weight: 1.0kg
Preheating time: 34 minutes
Hot mounting axle: 2 axes
Real Buyer Show
Cold Mounting Thermoplastic Film Pressing Machine
Fast Plastic/Plastic Flat/Gluing Dense/Easy to Use
Post-moulded Photos/Post-moulded Photos
Function
1.Rapid preheating
2.Molding and leveling
3.Cold mounting hot mounting
4.One key film removal
5.Status display
6.Low noise
All sizes within A4 are applicable
With only 3-5 minutes preheating, the superplastic speed can reach 300 mm/min, which greatly saves waiting
time and superplastic time and improves work efficiency.
Cold mounting and thermoplastic modes can
be switched according to demand
When the temperature is up to the requirement,
it will keep constant temperature so that the superplastic effect is better without blistering and wrinkling.
With the release key, the release of the film,
you needto hand pull out the security to protect
your photos and documents
Setting up power supply and working indicator lights, switches, film withdrawal and cold-hot mounting switch button working state is clear, multi-function one-button switch, a variety of requirements can be completed by one machine
Product size
Step1:
Connect the plastic sealing machine to the power supply, open the switch machine and start preheating
Step2:
Wait for 3 minutes for preheating to place the plastic-encapsulated documents smoothly into the plastic-encapsulated film
Step3:
It will be bright until the plastic film leaves the plastic sealing machine and is cooled for a while.
Instructions for the Use of Plastic Sealing Machine
1. Put one sheet at a time, not support multiple sheets.
2. It is not recommended to seal irregular products.
3. The arc shape of plastic seal is due to the downward
slide when it comes out.
4. Pay attention to the edge and easy to get stuck.
Note: The situation of over-plastic method in the above pictures is not desirable.