DIY Drone Particle Spreader Seed Fertilizer Fish Bait Particle Spread Spraying System Seed Fertilizer bait for Agricultural UAV

Picture packing list: 
FSML-04 Fertilizer Spraying Device  :  1 set (Black) 

FSML-04 Fertilizer Spraying Device Packing list: 
Fertilizer Spraying Device : 1pcs
PCB board: 1pcs

NO .1 Tie-in way
FSML-04 Fertilizer Spraying Device  :  1 set (Black) 
NO.2 Tie-in way
FSML-03 Fertilizer Spraying Device  :  1 set (White) 
NO.3  Tie-in way
DCL-01 BUCK Module : 1pcs （Adjustable 1V-36V ）
NO.4  Tie-in way
Aluminum alloy conversion connection (For 22L and 30L water tank)
NO.5  Tie-in way
BWP-03 5L water tank: 1pcs
NO.6  Tie-in way
BWP-04 10Lwater tank: 1pcs
NO.7  Tie-in way
FWP-07 13L Tank:1pcs
ACL-04 Connector : 4pcs
NO.8 Tie-in way
AWT22-01 22L water tank: 1pcs
NO.9 Tie-in way
AWT30-01 30L water tank: 1pcs
NO.10 Tie-in way
(For DJI 1.0 or 2.0 Flight control)
​​​​​​​For N3/A3 AG 1.0 / 2.0 Flight Control DIY Accessories: 1set  
NO.1１ Tie-in way
BWP-03 5L water tank: 1pcs
IBT-01 Quick reload battery cartridge: 1set(For 1pcs 6S 16000mah battery)
FSML-03 Fertilizer Spraying Device  :  1 set (White) 
NO.1２ Tie-in way
BWP-04 10L water Tank: 1pcs
IBT-02 Quick reload battery cartridge: 1set(For 2pcs 6S 16000mah battery)
ACL-01 Aluminium Alloy Connector:4pcs (For 18mm pipe)
FSML-03 Fertilizer Spraying Device  :  1 set (White) 
NO.1３ Tie-in way
13L Tank: 1pcs
ACL-04 Aluminium Alloy Connector:4pcs(For 18mm pipe) 
FSML-04 Fertilizer Spraying Device  :  1 set (Black) 
NO.1４ Tie-in way
AWT22-01 22L Water Tank: 1pcs
Aluminum conversion connection: 1pcs
FSML-04 Fertilizer Spraying Device  :  1 set (Black) 
NO.15 Tie-in way
AWT30-01 30L Water Tank: 1pcs
Aluminum conversion connection: 1pcs
FSML-04 Fertilizer Spraying Device  :  1 set (Black) 

    FSML-04  Fertilizer spreader for Agricultural Drone,Use for spreading granular fertilizer,pesitcides,seed and other granule.

  The door of the spreader feed inlet can close or open or open at any position by the control know switch,And the speed of the spreader trunplate can be adjustable by the controller know swtich too.
  The special design of the spreader turnplate can spreading the granule uniform.

 

Note:
1：The fertilizer spreader has black and white, please leave a message to me, need white  or black.
2: 22L 30L water tank requires aluminum alloy conversion connection
3: This device is a separate controller system, it connect to the receiver (remote controller), it is not related to the flight controller, it is controlled by remote controller.
4: The fertilizer spreader input voltage is 22-25V, if you use 48V voltage, you need to use a DC module to make the voltage to 22-25V.
5: Polarity reversed will burn the board.
6: Remote control is PWM mode , set 2 channels , different swiches .

7: Not supporte DJI A3/N3 AG 2.0+datalink 3.
8: Support DJI A3/N3 AG 2.0 + Other brand remote control (need have 2 rotating channels for the fertilizer spreading system).
9: About DJI A3/N3 AG 1.0 +Data link3 DIY Connection:

    Via the F1 channel to control the spreading system door and wheel speed. plug the signal wires into F1 port of the N3/A3 AG 1.0 FC.  then the pump swtich on the datalink3 controller will work with the spreading system.
 

10:  Support (1-5mm diameter) granule (seed or fertilizer):