Specifications:
Material: Metal
Color: Silver
Size: approx. 5.5 X 2 X 1.5cm/2.16 X 0.78 X 0.59inch
Weight: approx. 17g
Using method:
1. Before installing the presser foot, please guide groove binding into the presser foot, to ensure that the groove rolling pressure foot selvage alignment.
2. Pull out binding strips from the rear of the presser foot.
3. Install the presser foot.
4. Adjust the needle position, until the needle point is located in the border edge.
Tip: if the needle can not be adjusted to the appropriate position on the edge, you can loosen the pressure foot screws, adjusting guide groove position and move around.
Usage:
The edge of the rough cloth can be decorated with cloth strips presser foot, helps you easily make the edging width less than 7mm. Straight stitches, zigzag stitches or decorative stitches can be used
Package Include:
1pc*Cloth Edge Presser
Note:
Please allow 1~2cm manual measurement error, thanks!
Due to light and computer screen reflect, the true color might be little different from the photo showing.