Wireless Remote Relay Module Self-locking/Interlock/Momentary/Manual Mode DC 5V 12V 315MHz 433MHz WIFI Switch Infrared Receive

433MHz 4CH 5V

1.Description: It is a 433MHz 4CH wireless receiver module.It has three working modules:self-locking,inching,and interlocking.Its output high level is equal to or slightly less than the operating voltage. 2.Feature: 1>.Self-locking/inching/interlocking working modes can be set 2>.The remote control can be paired freely 3>.Four-way output control 4>.Its receiving distance is long 3.Description: 1>.Product Name:433MHz 4CH Wireless Receiver Module 2>.Working Voltage:DC 4.5~5.5V 3>.Output Mode:The default output is low level when the mode is powered on,and output high level after pressing the remote control button,OUT1-OUT4 are 4 output ports respectively. 4>.Maximum Output Current:the maximum output current of each channel is within 10MA 5>.Static Working Current:3mA 6>.Receiving Distance:between 15~50 meters (through walls) 7>.Work Instructions:D1 (learning indicator and receiving signal indicator) 8>.Work Temperature:-25℃~85℃ 9>.Work Humidity:5%~95%RH 10>.Module Size:26*23*5mm 11>.Remote Controller Size:60*40*15mm 4.Study Method: 1>.After power on,press and hold the learning button,the learning indicator flashes once,release the button,and then press and hold the remote control button that needs to be learned,the learning indicator flashes 3 times and does not flash,and the first way of learning is completed. 2>.After power on,press and hold the learning button,the learning indicator flashes 2 times,release the button,and then press and hold the remote control button that needs to be learned,the learning indicator flashes 3 times and does not flash,and the second way of learning is completed. 3>.After power on,press and hold the learning button,the learning indicator flashes 3 times,release the button,and then press and hold the remote control button that needs to be learned,the learning indicator flashes 3 times and does not flash,and the third learning is completed. 4>.After powering on,press and hold the learning button,the learning indicator flashes 4 times,release the button,and then press the remote control button that needs to be learned,the learning indicator flashes 3 times and does not flash,and the fourth way of learning is completed. 5>.Clearing method:In the power off state,press and hold the learning button,then power on,after the learning indicator flashes 4 times,release the button,indicating that the module is successfully cleared. 5.Function Conversion Operation: 1>.Interlock:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes once,release the button,and set to interlock output at this time.(Press the remote control button,the corresponding channel of the module has output,and all other channels are closed without output) 2>.Self-locking:In the power-off state,press and hold the learning button and then turn on the power,the learning indicator flashes 2 times,release the button,and set to self-locking output at this time.(Press the remote control button,the corresponding output channel of the module will be inverted without affecting the state of other channels,release the remote control to keep the output state) 3>.Inching:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 3 times,release the button,and set to inching output.(Press the remote control button,the corresponding channel of the module has output,release Remote control output stops) 6.Package: 1>.1pc 433MHz 4CH Wireless Receiver Module 2>.1pc Remote Control

433MHz 4CH 12V

Description: 1>.Product Name:4-Channel Wireless Remote Relay Module 2>.Working Voltage:11V~12.5V 3>.Working Current:138mA (relay pull-in state) 4>.Static Working Current:8mA (relay release state) 5>.Receiving Distance:15~100 meters (through walls) 6>.Working Mode:self-locking and inching two working modules (four channels can be independently set as self-locking or inching) 7>.Work Instructions:D5 (power indicator light),D1~D4 (relay switch indicator light),D6 (learning indicator light) 8>.Output Mode:The output is passive output,and the module is mainly used as a switch.Normally open terminal (CK),common terminal (COM),normally closed terminal (CB) (Note:Normally closed and common terminals are connected under normal conditions.Normally closed terminals are usually not used when used as a switch.Only normally open and common terminals are used.) 9>.Work Temperature:-25℃~85℃ 10>.Work Humidity:5%~95%RH 11>.Module Size:65*56*19mm 12>.Remote Controller Size:60*40*15mm 4.Study Method: 1>.After powering on,press the learning button S1,and release it immediately,then press S1 again,the learning indicator will flash once,and then release the S1 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,Which proves that the first way of learning is successful. 2>.After powering on,press the learning button S2,and release it immediately,then press S2 again,the learning indicator will flash once,then release the S2 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,Which proves that the second way of learning is successful. 3>.After powering on,press the learning button S3,and release it immediately,then press S3 again,the learning indicator will flash once,and then release the S3 button;press the remote control button that needs to be learned,and the learning indicator will flash twice ,Which proves the success of the third way. 4>.After powering on,press the learning button S4,and release it immediately,then press S4 again,the learning indicator will flash once,then release the S4 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,Which proves that the fourth way of learning is successful. 5>.Removal method:In the power-off state,press and hold any learning button S1~S4,then power on,the learning indicator flashes 4 times,release the button to indicate that the module is successfully cleared. 5.Function Conversion: 1>.Inching:In the state of power off,press and hold the learning button and then power on,the learning indicator flashes 2 times,release the button,and set to inching output.(Press the remote control button,the corresponding channel of the module has output,release Remote control output stops) 2>.Self-locking:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 3 times,release the button,and set to self-locking output.(Press the remote control button,the corresponding output channel of the module will be inverted without affecting the state of other channels,release the remote control to keep the output state) 3>.The 4 channels of this module are set independently,and the self-locking and inching of each channel are set independently,without mutual interference 4>.The first setting:In the power-off state,press and hold the learning key and press S1 and then turn on the power,the learning indicator flashes 2 times,release the key S1,this way is set to inching,after 3 flashes,release the setting to auto lock. 5>.The second setting:In the power-off state,press and hold the learning button and press S2 and then power on,the learning indicator will flash 2 times,release the button S2,this way is set to inching,after 3 flashes,release the setting to auto lock. 6>.The third setting:In the power off state,press and hold the learning button and press S3 and then power on,the learning indicator will flash 2 times,release the button S3,this way is set to inching,after 3 flashes,release the setting to auto lock. 7>.The fourth setting:In the power-off state,press and hold the learning key and press S4 and then power on,the learning indicator flashes 2 times,release the button S4,this way is set to inching,and after 3 flashes,release the setting to auto lock.

433MHz 4CH 5V Relay

Description: 1>.Product Name:433MHz 4CH Wireless Remote Relay Module 2>.Working Voltage:4.5V~5.5V 3>.Working Current:138mA (relay pull-in state) 4>.Static Working Current:8mA (relay release state) 5>.Receiving Distance:15~100 meters (through walls) 6>.Working Mode:self-locking,inching,interlocking 7>.Work Instructions:D5 (power indicator light),D1~D4 (relay switch indicator light),D6 (learning indicator light) 8>.Output Mode:The output is passive output,and the module is mainly used as a switch. 9>.Work Temperature:-25℃~85℃ 10>.Work Humidity:5%~95%RH 11>.Module Size:65*62*20mm 12>.Remote Controller Size:60*40*15mm Study Method: 1>.After powering on,press the learning button S1,and release it immediately,then press S1 again,the learning indicator will flash once,and then release the S1 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,To prove the success of the first way of learning. 2>.After powering on,press the learning button S2,and release it immediately,and then press S2 again,the learning indicator will flash once,then release the S2 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,To prove the success of the second way of learning. 3>.After powering on,press the learning button S3,and release it immediately,then press S3 again,the learning indicator will flash once,then release the S3 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,To prove the success of the third way of learning. 4>.After powering on,press the learning button S4,and release it immediately,then press S4 again,the learning indicator will flash once,then release the S4 button;press the remote control button that needs to be learned,and the learning indicator will flash 2 times ,To prove the success of the fourth way of learning. 5>.Removal method:In the power off state,press and hold any learning button S1-S4,then power on,the learning indicator flashes 4 times,and release the button to indicate that the module is successfully cleared. Setting function: 1>.The 4 channels of this module are independently set,and the self-locking and jog of each channel are independently set without interfering with each other. 2>.The first setting:In the power-off state,press and hold the learning button and press S1 and then power on,the learning indicator flashes 2 times,release the button S1,this way is set to jog,and after 3 flashes,release the setting to auto lock. 3>.The second setting:In the power-off state,press and hold the learning key and press S2 and then turn on the power,the learning indicator flashes 2 times,release the button S2,this way is set to jog,after 3 flashes,release the setting to auto lock. 4>.The third setting:In the power off state,press and hold the learning button and press S3 and then power on,the learning indicator will flash 2 times,release the button S3,this way is set to jog,after 3 flashes,release the setting to auto lock. 5>.The fourth setting:In the power-off state,press and hold the learning key and press S4 and then power on,the learning indicator flashes 2 times,release the button S4,this way is set to jog,and after 3 flashes,release the setting to auto lock.

315MHz 4CH 5V

Description: 1>.Product Name:4-Channel Wireless Remote Relay Module 2>.Working Voltage:11V~12.5V 3>.Working Current:138mA (relay pull-in state) 4>.Static Working Current:8mA (relay release state) 5>.Receiving Distance:between 15~100 meters (through walls) 6>.Working Mode:self-locking,inching,interlocking 7>.Work Instructions:D5 (power indicator light),D1-D4 (relay switch indicator light),D6 (learning indicator light) 8>.Output Mode:The output is passive output,and the module is mainly used as a switch. 9>.Work Temperature:-25℃~85℃ 10>.Work Humidity:5%~95%RH 11>.Module Size:65*53*19mm 12>.Remote Controller Size:60*40*15mm Function Conversion: 1>.Interlock:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes once,release the button,and set to interlock output at this time.(Press the remote control button,the corresponding channel of the module has output,and all other channels are closed without output) 2>.Self-locking:In the power-off state,press and hold the learning button and then turn on the power,the learning indicator flashes 2 times,release the button,and set to self-locking output at this time.(Press the remote control button,the corresponding output channel of the module will be inverted without affecting the state of other channels,release the remote control to keep the output state) 3>.Inching:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 3 times,release the button,and set to inching output.(Press the remote control button,the corresponding channel of the module has output,release Remote control output stops)

315MHz 2CH 12V

Description: 1>.Product Name:2CH Wireless Remote Relay Module 2>.Working Voltage:11V~12.5V 3>.Working Current:100mA (relay pull-in state) 4>.Static Working Current:8mA (relay release state) 5>.Receiving Distance:15~100 meters (through walls) 6>.Working Mode:self-locking,inching,interlocking 7>.Work Instructions:D6 (power indicator light),D1-D2 (relay switch indicator light),D5 (learning indicator light) 8>.Work Temperature:-25℃~85℃ 9>.Work Humidity:5%~95%RH 10>.Module Size:53*40*20mm 11>.Remote Controller Size:60*40*15mm Study Method: 1>.After power on,press the learning button,the learning indicator will flash once to prove that the first channel of learning is triggered successfully,and then press the remote control button that needs to be learned,and the learning indicator will flash 2 times to prove that the first channel of learning is successful. 2>.After powering on,press the learning button,the learning indicator will flash 2 times,proving that the second channel of learning is triggered successfully,and then press the remote control button that needs to be learned,and the learning indicator flashes 2 times,proving the success of the second learning. 3>.Removal method:In the power off state,press and hold the learning button,then power on,the learning indicator flashes 4 times,indicating that the module is successfully cleared. Function conversion: 1>.Interlock:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes once,release the button,and set to interlock output at this time.(Press the remote control button,the corresponding channel of the module has output,and all other channels are closed without output) 2>.Self-locking:In the power-off state,press and hold the learning button and then turn on the power,the learning indicator flashes 2 times,release the button,and set to self-locking output at this time.(Press the remote control button,the corresponding output channel of the module will be inverted without affecting the state of other channels,release the remote control to keep the output state) 3>.Inching:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 3 times,release the button,and set to jog output.(Press the remote control button,the corresponding channel of the module has output,release Remote control output stops)

315MHz 1CH 5V

Description: 1>.Product Name:Wireless Remote Relay Module 2>.Working Voltage:4.5V~5.5V 3>.Working Current:70mA (relay closed state) 4>.Static Working Current:4mA (relay release state) 5>.Receiving Distance:15~30 meters (through walls) 6>.Working Mode:self-locking,inching,interlocking 7>.Work Instructions:D2 (power indicator light),D1 (relay switch indicator light),D3 (signal receiving indicator light) 8>.Work Temperature:-25℃~85℃ 9>.Work Humidity:5%~95%RH 10>.Module Size:45*30*20mm 11>.Shell Size:65*31*22mm 12>.Remote Controller Size:60*40*15mm Function Conversion: 1>.Interlock:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 2 times,release the button,and set to interlock output at this time.(Press the remote control button,the corresponding channel of the module has output,and all other channels are closed without output) 2>.Self-locking:In the power-off state,press and hold the learning button and then power on,the learning indicator flashes 3 times,release the button,and set to self-locking output.(Press the remote control button,the corresponding output channel of the module will be inverted without affecting the state of other channels,release the remote control to keep the output state) 3>.Inching:In the power-off state,press and hold the learning button and then turn on the power,the learning indicator flashes 4 times,release the button,and set to jog output.(Press the remote control button,the corresponding channel of the module has output,release the remote control Output stop)

Infrared 8CH 5V

1.Description: It is a 8bit infrared receiver module.This connection is a self-locking receiver and remote control kit.When the equipped 9-key remote control presses CH1,the relay CH1 of the receiving board pulls in LED D1,and when CH1 is pressed again,the relay CH1 releases LED D1,and the CH2 key also corresponds Control relay CH2 and LED D2,CH3 to CH8 and so on,the power button of the remote control simultaneously controls the pull-in and release of all relays,so 8-channel self-locking remote control switches can be realized. 2.Feature: 1>.It has fixing holes for easy use. 2>.Low power consumption 3>.It has a working indicator. 4>.Its receiving distance is long 3.Description: 1>.Product Name:8bit Infrared Receiver Module 1>.Supply Voltage:DC 5V 2>.Quiescent Current:5mA(Max) 3>.Working Current:250mA(Max) 4>.Remote Control Distance:8 meter(Max) 6>.Work Temperature:-25℃~85℃ 7>.Work Humidity:5%~95%RH 8>.Module Size:93*60*22mm 9>.Remote Controller Size:86*40*5mm

Infrared 2CH 5V

1.Description: It is a 2bit infrared receiver module.This connection is a self-locking receiver and remote control kit.When the equipped 3-button remote control presses CH1,the relay 1 of the receiving board turns on LED1,and when CH1 is pressed again,the relay 1 releases LED1 and goes out.The CH2 key also corresponds to the control relay.2 and LED2,the power button of the remote control simultaneously controls the pull-in and release of all relays,so 2 self-locking remote control switches can be realized. Description: 1>.Product Name:2bit Infrared Receiver Module 2>.Supply Voltage:DC 5V 3>.Quiescent Current:1mA(Max) 4>.Working Current:120mA(Max) 5>.Remote Control Distance:8 meter(Max) 6>.Work Temperature:-25℃~85℃ 7>.Work Humidity:5%~95%RH 8>.Module Size:50*40*20mm 9>.Remote Controller Size:86*40*5mm

WIFI 2CH 12V Relay

1.Description: It is a wireless WIFI relay control switch module.Its operating voltage is 7V~24V.It is the remote wireless intelligent control of the mobile phone.As long as the cell phone and reception can be controlled in any area of the available network area (the distance is infinitely far).It can be configured through a mobile phone to a wireless router to achieve remote switching and timing control.A number of switches can be controlled by a mobile phone.More one button sharing function,easy to share.To achieve multiple mobile phone remote control.The module is simple and convenient to use,and it is safe and reliable. 2.Product features: 1>.Point motion/self lock/interlock,and you can switch yourself at will.After the mode setting is completed,the set mode will not change even if the module is restarted. 2>.WIFI mobile APP remote intelligent control.After pairing the cell phone with the module,it can achieve infinite distance control (it is necessary to ensure that the module is connected to WIFI),and has the function of manual key switch. 3>.Wide operating voltage 7V~24V power supply. 4>.Its control distance is long. 3.Parameters: 1>.Product Name:Wireless WIFI Relay Control Switch Module 2>.Control Mode:WiFi 2 way mobile phone APP remote control+button manual control(Point motion/self lock/interlock switch freely) 3>.Transmission Mode:WIFI communication.When the control module is connected to WiFi,it can support 2G,3G and 4G network signal control.It can control wireless remote control by learning 433M's remote controller. 4>.Controlled Line:7-24V power supply 4 passive output.The output is as a mechanical switch. 5>.Control Distance:mobile phone control distance is infinitely far 6>.Working Voltage:DC 7V~24V(CK COM CB) control output interface.When used as a mechanical switch,CB is usually not used.CK and COM form a switch. 7>.Output Maximum Control Current:10A 8>.Terminal Platform:Android /IOS 9>.Work Temperature:0℃~60℃ 10>.Work Humidity:5%~95%RH 11>.Module Size:73*53*24mm 12>.Shell Size:73*53*35mm 13>.Remote Controller Size:60*40*15mm 4.Product matching process: 1>.Search "eWelink" APP. 2>.Download and install the APP. 3>.Registration of APP software accounts with mobile phone numbers 4>.Login software after registration of OK 5>.An arbitrary button of the controller is pressed for 5 seconds,and the indicator light is flicker to uniform flicker.Then release the button and select the "+" add device in the landing software,and click the next step until the match is successful. 6>.Automatically add the name of the device after the completion of the automatic addition,click finish. 5.Key Function: 1>.The remote control learns to pair: 1.1>.Press and hold the learning button,the indicator light flashes once and let go to learn the first way;the indicator flashes 2 times and let go,learn the second way. 1.2>.After the learning is completed,power off,press and hold the learning button,and then power on,the learning indicator flashes 3 times and release,the learning setting is completed. 2>.Wireless remote control removal: 1.1>.Power off first,press and hold the learning button,then power on,the learning indicator flashes 4 times and release,clearing is complete. 3>.Mode selection button: 1.1>.Press and hold MODE button indicator D5: Flash 1 time,release and set to jog Flash 2 lower release and set to interlock Flash 3 times to release and set to self-lock 4.Module pairing button:Press any one of the S1 and S2 buttons for about 5 seconds,the module indicator D3 will change from slow flashing to fast 3 times,and steady on 1 time,and the module enters the pairing mode. 6.Package: 1>.1pc 2bit Infrared Receiver Module 2>.1pc Remote Control 3>.1pc Shell