Motion Sensor Ceiling Light Battery Operated Indoor/Outdoor LED Ceiling Lights 190x190x46mm abs 80 LEDs lighting home livingroom
Feature:
1.Built-in PIR infrared motion detector, when it detects motion within 8 meters in the dark environment, the LED top light will light up immediately. After 20 seconds, when no action is detected, it will automatically shut down to save battery life.
2.[Two modes] There is a switch near the motion sensor, slide the switch to turn on/off the photoelectric sensor. When it is turned on, it is off during the day and only at night; when it is off, it is on all day.
3.[Battery-powered motion sensor light] is powered by 4*D battery alkaline batteries (without batteries), which can light up an area of 30 square meters. The battery can provide up to 12 months of lighting, an average of 6-8 times a day.
4.[Super bright led light] Built-in 80 bright and long-life SMD2835LEDs. It can diffuse in all directions and has a brightness of up to 300 lumens to ensure that you will not trip in the dark and protect your lover and children from the fear of darkness at home.
5.[Easy installation, wide application range] No wires are needed, and it can be installed quickly and easily within 5 minutes. Suitable for your bedroom, bathroom, staircase, corridor, workshop, basement, garage entrance, roof, doorway.
Specifications:
Material: ABS
Size: 190*190*46mm/7.5*7.5*1.81in.
Light color: white, warm white.
Number of lamp beads: 80 LEDs.
Sensitivity: a distance of about 8 meters.
Sensor range: about 120 degrees.
Delay time: 20S.
LED life: ≥50000 hours.
Battery type: 4 * D type battery (not included).
Installation Notes:
1. Rotate the back panel of the product clockwise
2. The fixed plug on the back cover can be easily lifted, and the back cover can be opened by rotating the back cover clockwise
3. Use the attached mounting hardware to install the back panel on the wall, ceiling or wherever you want.
4. Insert the battery into the battery container of the lamp.
5. Close the back cover, turn the lamp body clockwise, press in the fixing plug, and turn the lamp body clockwise to make the back cover tightly fixed.
Package Contents:
1 * Motion sensor ceiling light,
1 * Fixed plug,
1 * User manual,
4 * Screw sleeve.