Installation Procedure
Step 1: Insert the cold light line into the door seam;
Step 2: The point of the cold light line is connected with the driver and connected with the power supply;
Step 3: If the end of the cold light line is long, you can cut it off.(before and after shearing, test whether the light is normal, and apply 502 glue for insulation after cutting.)
Installation Suggestions
1: It is recommended to install according to professional master, and those with strong hands-on ability can choose to install by themselves;
2: Installation suggestions of red power cord at instrument panel and central control position;
[car starts on] - the positive wire is connected to ACC power supply;
[turn on the headlamp] - the positive wire is connected to the power line that controls the headlight on;
[turn on small lamp on] - the positive wire is connected to the power line controlling the small lamp to turn on;
3: The red power line of the cold light driver of the door trim panel is connected to the power supply of the window regulator or the switch power supply of the window regulator;
4: Black negative grounding connection;