Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Heimdall Magnetic Track Light
1.No transformer required 2.Can control a single lamp 3.Support infinite dimming 4.Controlled by APP
Easy to install Control the lights as per you need Color temperature and brightness adjustment Multiple light control modes
No transformer required
Easy to install, no longer worry about hiding transformers
Support app remote control
Wiring-free wireless remote control switch Master switch can turn off all lights One key can control one lamp or multi lamps,implement group control(There are at most 4 groups) No wiring(Stick it wherever you want)
Smart Gateway One gateway can realize device interconnection
One lamp/Group control
Controls every lamp freely
Freely transform and master at wish
Free movement, the angle of the lamp head can be adjusted at will Track corner 90° 360° horizontal adjustment 90° vertical adjustment Track vertical corner 90° Track splicing head
Installated by magnetic, conveniently and concisely
Absorbed by putting it into the track, take them out by pressing the buttons on both sides
Deep Tibetan design conductive strip, safe and worry-free
Zero rick to touch it
The length can be cut at will/ Easy to stitch
Length can be cut at will as requirements without affecting the usage
Three installation methods are available
Recessed mounted Ceiling mounted Pendant installation Recessed Surface Suspending
Recessed Track Installation Steps:
The board is at least 60MM away from the ceiling 1.Determine the hole location of the board 2.Measure the screw hole distance of the embedded parts corresponding to the track, and fix the embedded parts on the wooden board with M4 self-tapping screws 3.Use self-tapping screws to directly pass through the holes of the five-pound embedded parts , fix the embedded parts with the ceiling board 4.Install gypsum board using self-tapping screws 5.Use screws to fix the angle protection line 6.After the installation of the gypsum board angle protection line is completed, ceiling batch gray paint brush to the gap between embedded parts and ceiling 7.Disconnect the power and connect the magnetic rail with the embedded parts and lock it into the ceiling trough 8.After the track and ceiling are fixed,track must do power-on test
null
null