ZENOBBQ Auto Flip Skewer Kebab Barbecue Grill Roast BBQ Rotisserie Automatic skewers kebabish Roasting Free Width Adjustment

INSTALLATION SIZE

It supports ovens (BBQ stoves) whose size from one inner wall to the opposite outer wall is less than 410mm. They all clamping ovens (BBQ stoves) wall thickness are not exceeding 50mm. NOTE:If you are not sure whether your oven (BBQ stove) is suitable, you can provide a picture of your oven (BBQ stove) inner diameters and wall thickness to the customer service online.

DIMENSION

The length of the main engine is 420mm, the height is 120mm, and the distance between the skewers is 30mm.

SKEWERS SELECTION

The mother clip models are MODEL Z5C and MODEL Z5D. If you choose the mother clip model, you need to bring your own bamboo skewers or other baking needles, but the diameter cannot exceed 4mm and the length is not limited.

The special needle models are MODEL Z5A and MODEL Z5B. If you choose the special needle model, you can grill directly without having to prepare your own baking needles.

If you want to buy more special needles, or want to use your own bamboo skewers with a diameter of less than 6mm or other baking needles with a diameter of less than 6mm for grilling, please click the link below to purchase.

MOTHER CLIP INSTALLATION

Before using for the first time, adjust the mother clip according to the size of your own bamboo skewers or other baking needles to be clamped (mother clip chuck fixed rotating handle or handle fixed rotating mother clip chuck). In the later use, just turn it clockwise to tighten it, and turn it counterclockwise to loosen it. Note: Please wear BBQ Anti-scalding gloves when loading and unloading the baking needles

INSTALL ON THE OVEN (BBQ STOVE)

NOTE: The oven (BBQ stove) below not included

INSTALLATION STEPS

Step1 Insert one of the threaded ends of the guide rod into any square hole on the back of the main engine unit as shown in the figure, and pass the round hole on the front.

Step2 Screw the wing nut clockwise to the thread of the guide rod, do not tighten it.

Step3 Install another guide rod in the other hole in the same way. The other two guide rods are screwed clockwise to the other end of the installed guide rods as shown in the figure.

NORMAL MISALIGNMENT

NOTE: Thread processing needs to have a certain clearance, so it is difficult to have the same plane after the guide rod is tightened, and there will be a normal misalignment. At this time, you only need to loosen the guide rod a little, Make sure that the surfaces of the two guide rods are flush.

Step4 For ovens (BBQ stoves) with a width of more than 20cm, pass the Skewer support frame and the Fixed frame through the guide rod in sequence as shown in Figure B; for ovens (BBQ stoves) with a width of less than 20cm, pass the Fixed frame and the Skewer support frame through the guide rod in sequence as shown in Figure A.

Step5 As shown in the figure, loosen the handle on the Fixed frame counterclockwise, and place the guide rods on the appropriate position of the oven or BBQ stove (sold separately, the same below), and the U-shaped frame on the Fixed frame is stuck on either side of the oven (BBQ stove).

Step6 Adjust the position of the Skewer support frame and the Fixed frame according to the length of the skewers to ensure that the effective part of the skewers is above the fire in the oven (BBQ stove) and the other end of the skewers is in the slot of the Skewer support frame.

Tighten the handle and thumb screws on the Fixed frame clockwise.

Step7 Please click on the picture below to refer to the motor installation

UPGRADE THE MOTOR

To upgrade the USB DC motor to a Multi-function DC motor, please click the link below to make up the difference USD7.00

Step8 The installation is complete.

Purchase accessories separately

Please click on the picture below to purchase the Automatic Spit Rotisserie