Features:
Easy to use and install
Long Life Span
No Noise
Isolation Protection
No minimum load, No transformer noise, No LED flickering
Specifications:
- Short circuit and overload protection
- Max Ambient Temp (deg. C) 40 deg. C
- Max Case Temp (deg. C) 80 deg C
- Safety Compliant: CE, LVD, EMC, RoHS, ETL
(A) 5-7W Dimmable LED Driver
Input voltage: AC180V-265V 50/60HZ, SEC: DC15-24V / 300mA
Size: 88mm x 38mm x 20mm/3.4" x 1.5" x 0.7"
(B) 8-12W Dimmable LED Driver
Input voltage: AC180V-265V 50/60HZ; SEC: DC24-42V / 300mA
Size:88mm x 38mm x 20mm/3.4" x 1.5" x 0.7"
(C) 13-18W Dimmable LED Driver
Input voltage: AC180V-265V 50/60HZ, SEC: DC40-60V / 300mA
Size: 3.9" x 1.7" x 0.8"
(D) 30-42W Dimmable LED Driver
Input voltage: AC 200V-240V 50/60HZ 0.26A;Output: DC30-42V / 1000mA
Size: 140mm x 48mm x 30mm/5.5" x 1.8" x 1.2"
(E) Dimmer Switch:
Operating Voltage: 220-240V
Frequency: 50Hz
Maximum Load: 200W
Minumum Load: 5W
Size: 85mm x 85mm x 50mm/3.4" x 3.4" x 2.0"
This item only suitable for single dimming bulbs above 5W, otherwise it will be flash
Tips:
1.The LED dimmer series are designed for One-Way or Two-Way operation as the diagram shows.
2.More than one dimmers cannot be connected in parallel or series to control the same load from two different locations.
3.Dimmer Mechanism is not polarity.
We have tried and tested these drivers for several years and they will enable you to achieve the full design life from your led lights, which should be between 30,000 and 50,000 hours. At 4 hours per day every day of the year, led lights could last over 34 years.
Applications:
These LED drivers are suitable for all G4, MR11, MR16, GU10 LED bulbs and also most LED strip lights, just make sure the maximum wattage of the strip light does not exceed the output power of the LED driver.
Package Included:
1 x LED Driver or Switch (Pls choose the one your needed)
Notes:
1. Please allow 1-3cm measuring deviation due to manual measurement.
2. If you have any questions, please contact our customer services.
