Product model: T10

Product color: black, rose gold, five colors

Product size: 14.9*4.5cm(diameter: 2.7cm)

Color box size: 19*15.5*5.8cm

Single weight (including color box accessories) : 275g

Accessories: 4 limit comb (1, 2, 3, 4mm) +1USB charging cable +1 brush +1 oil bottle

Product parameters

Voltage: 5 V

Charging mode: USB charging (Type-C interface)

Battery information: 14500 lithium battery 1000mAH 3.7V

Rated power: 5W

Charging time: about 120 minutes

Full charge available time: about 60 minutes

T14=======>

Product parameter

Voltage: 5V

Charging method: USB charging

Battery information: 1200 mAh lithium battery

Rated power: 5W

Charging time: about 120 minutes

Available time for full charge: about 90 minutes

product advantages

1.T type 0 cutter head

2.1200 mAh large capacity lithium battery 3.7V

How to use:

To charge the product,please insert the small plug of type-C charging cable into bottom socket,then insert the other end of the power cord into the transformer(Note:when the transformer connector is greater than or equal to 6v,the product will not be charged)

Connect the power supply,the charging indicator will red,indicating that it is chartging.

Charged for about 1 hour,the indicator red light if off,it indicated that the charging has been completed.

It is fully charged and can be used for more than 1.5hours.When the indicator red light flashes,it indicateds that the power is insufficient and needs to be charged in times.

When cutting hair,remove the protective cover of the cutting head ,turn on the switch of the cutting scissors ,and the indicator blue light is on .Then move the cutting scissors head slowly against the direction of hair growth,and move in a straight and circutous way.

Three specifications of comb row are attched:1mm/2mm/3mm/4mm,which can be replaced at will according to the length of trimming.

When the product does not have electricity,it can be connected to the charger for direct use (plug and use)

If the load is too large,it will automatically shut down(locked rotor protection)

How to maintecance:

Before cleaning,always disconnect the power and turn off the product,take out the attached comb(if the comb row is used),wash it directly under the faucet,and gently brush the remaining hair on the blade and product surface with the provided cleaning brush.

After cleaning ,in order to obtain better effect of the blade,if necessary,put each drop of lubricating oil in the left,middle and right of the blade head ,and start the machine for several times to wipe the surface of blade head ,so as to keep it sharp,rotate it lightly and prevent wear.

When the hair trimmer is not in use,cover the blade with protection sleeve to prevent damage.

Attention:

Danger:Keep the adaptor dry

Warnings:

Before connecting the power supply,please make sure that the voltage marked on the product is consistent with the local power voltage.

Don't charge continuously for a long time,or charge it when the temperature is lower thatn 0℃ or higher thatn 40℃，othewise the life of the battery will be shortened.

The product is only allowed to use the matching charging cable for charging .Do not use any accessories not  provided by the company with the product.

Before cleaning the hair trimmer under tap water,be sure to unplug the charger

If the power cord is damaged,it must be replaced with a special flexible cord or a special component purchased from the manufacturer or maintenance department

When there is a stain on the body,use a soft cloth to dip the neutral detergent and wipe it.Do not use alcohol,gasoline or other chemicals to wipe the product.

In case of abnormal conditions(such as abnormal smell,temperature and sound) during charging or use,the power supply shall be cut off immediately and stop using it.

Please handly it according to the type of fault ,and submit to the maintenance department of our company for maintenance if necessary.