Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
The hot spot of our steam engine
1. Time setting: the ST panel can control the operation for 1-12 hours.
2. Temperature setting: the temperature can be set in the range of 250-550.
3. Automatic water shortage protection.
4. Over high temperature protection, prevent dry burning.
5. Over pressure protection, pressure relief valve to prevent blocking steam outlet and tank expansion.
220V steam engine power installation
Loosen the screw and lift the cover.On the right side of the machine, open the blind hole of the power supply into the machine, strip off the 5CM long insulation layer of the three-core cable connecting the machine, and connect the ground wire with the yellow-green multi-core wire of the machine.Connect the two power cables with terminals marked "L", "L" and "N" and" N" respectively. After the controller is installed, the machine can start up.
380V steam engine power installation
Loosen the screw and lift the cover.On the right side of the machine, open the blind hole of the power supply into the machine, strip off the 5CM long insulation layer of the five-core cable connecting the machine, and connect the ground wire with the yellow-green multi-core wire of the machine.Connect the four power cables with terminals marked "N", "L1 "and "L2" and "L3" respectively. After the controller is installed, the machine can start up.