ZENOBBQ Manual BBQ Spit Rotisserie Rotating Grill Length Adjustable Outdoor Camping Equipment Roaster Accessories Chicken Fork

DESCRIPTION

Manual Rotisserie (Hand Rotating Grill) is composed of the following parts: 1 Main bracket(steel chrome-plated) 2 Sub bracket(steel chrome-plated) 3 Rod(stainless steel) 4 Fork(stainless steel) with thumb screws(stainless steel) 5 Handle(stainless steel) It can be Installed on the ovens(BBQ stoves) to rotate roast whole chicken, roast fish, roast vegetables, etc. Quick to install without tools and easy to carry. With position hold function. The length can be adjusted freely within the effective range.

Please click on the picture below to purchase the Model L4069

BRACKET

This product has a (A) main bracket and a (B) sub bracket, and the installation is regardless of front and rear, as long as it is installed opposite. The surface of all the brackets is chrome plated, using 2mm thickness cold-rolled steel plates, with two heights, and using thread locking devices.

TWO HEIGHTS

High

Low

INSTALL ON THE OVEN(BBQ STOVE)

NOTE: The oven(BBQ stove) below not included

USE OF AUXILIARY SCREWS IN DIFFERENT OVENS(BBQ STOVES)

NOTE: The below green wire frame is the shape of the clamped oven(BBQ stove) wall,The auxiliary screws is M5*35mm wing screw. Option1:Auxiliary screw in the lower hole

POSITION HOLD

When you are tired by hand rotation, you can find a suitable position to keep. Can be kept in horizontal or vertical position.

STEPS FOR POSITION HOLD

Step1 Pick up Step2 Push forward Step3 Put down

INSTALLATION STEPS

Step1 Turn the locking screws on the main bracket and sub bracket counterclockwise to loosen to the appropriate position.

Step2 Clamp the main bracket and sub bracket to the appropriate position of the oven(BBQ stove) (sold separately, the same below), Turn the locking screw clockwise not to tighten, and choose whether to use auxiliary screws according to the shape of the oven(BBQ stove).

Step3 Screw the rod to the handle, do not tighten, put it on the main bracket and sub bracket to test that it can rotate smoothly, and then tighten the locking screws (the same as the auxiliary screws).

Step4 The fork through the rod, screw the thumb screw to the fork. After loading the food, adjust it to the proper position and tighten the thumb screws. Place it in the proper height on the main bracket and sub bracket to rotate by hand.

NORMAL MISALIGNMENT

NOTE: Thread processing needs to have a certain clearance, so it is difficult to have the same plane after the rod is tightened, and there will be a normal misalignment. At this time, you only need to loosen the rod a little, then put on the fork to the rod after the plane coincides. Tighten the rod after all the food is loaded.