The chocolate heater is widely used in hotels, restaurants, shopping malls, bakeries, cafes, chocolate shops, chocolate fountains, etc, to melt chocolate chips.
Illustration on Function Parameters
①. Return difference temperature F2: F2 = set temperature – lower limit temperature, assuming that the temperature should be controlled between 20 ℃ and 22 ℃, set temperature as 22 ℃, the lower limit temperature as 20 ℃, then the return difference temperature F2 = 2 ℃ (default return difference as 2 ℃).
②. Temperature error correction F1: When the display temperature and actual temperature are different, this parameter can be corrected to make the two identical, F1 = actual temperature - display temperature.
③. When the temperature sensor meets “Measuring temperature = set temperature – return difference temperature F2, the red indicator is on which means an automatic access to the heating device; When the temperature sensors meets “measuring temperature = set temperature," the red heat indicator is off and the yellow ready indicate light is on which means the heating device is cut off.
④. Digital temperature controller: It is on the control panel and mainly in charge of controlling the heating temperature of the heat pipe to ensure the water temperature inside the tank.
Cleaning and Maintenance
In case of accidents, cut off electricity when cleaning the machine
Every time after use, clean the machine with a wet towel. Don’t use erosive detergent. Pay special attention when cleaning operation panel, since if water is let inside, electric parts will be damaged and there will be short circuit
Do not wash the machine directly with running water
Water must be drained out of the tank after it is cooled down
Note
Adjust the temperature to 70-80℃ / 158-176℉ until the chocolate melts, then adjust the temperature according to your own needs.
Taicang Vevor Machinery Equipment CO.,LTD.We operates more than 1000 kinds of machinery equipment products,and engaged in cross-border business for 10 years.At present,we have more than 200 employees.
Our concept is Market-oriented, based on the customer service
Through years of practice,we have accumulated valuable experience in the mechanical equipment industry,which gives us the opportunity to serve companies from different countries. In the future,we will give full play to our strengths in the mechanical equipment industry,and actively participate in the construction of the Silk Road Economic Belt and the 21st-Century Maritime Silk Road to share high-quality production capacity and mutual benefit.
