Flash dryer18" X 18" Silk Screen Printing Flash Dryer Adjustable Stand T-Shirt Curing
Introduction
This is a professionally built brand new flash dryer. It has a 18x18" heating grid opening, wheels, and a standard plug, so there is no special wiring required. This unit can be raised or lowered from 30" to 48". It is heavy-duty. The temperature is over 400 degrees F at distance of 2 1/2" below the flash heating element. It can quickly cure ink for silkscreen printing. The flash screen printing dryer can dry the ink quickly to print the next color by the flash dryer.
-
Excellent Quality
-
Large Drying Area
-
Adjustable Height
-
Accurate Thermostat & Sensor
Note:Notice the fusing fuse in a long time continuous period,rest for cool,and check it regularly.Reserve properly,for electrical components is attractive to dust.Clean it's platform regularly before use and after.This item takes approximately 5 minutes from initial turn on to stabilize temperature. There will be natural fluctuations in the temperature as you use the item.
Features & Details
-
【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
-
【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18" x 18" (45 x 45 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
-
【PREMIUM PERFORMANCE】- Equipped with the intensive heat dissipation vents, the temperature is fixed at 400 ℃. Uniform heating makes the drying speed of the ink faster and better than ordinary machines.
-
【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30"-48".
-
【SOLID X-SHAPED BASE】- The base of the 18 x 18 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
Specifications
-
Minimum Height: 30"
-
Maximum height: 48."
-
Shipped Weight: 53 lbs
-
Heating Area: 18" x 18"
-
Base Dimensions: 38" x 38"
-
Top Dimensions: 29" x 19"
-
380-degree level swivel head
-
Average Current Draw: 13 Amps
-
Maximum Current Draw: 16.5 Amps
-
Average Power Usage: 1350 Watts
-
Maximum Power Usage: 2000 Watts
-
Assembled Dimensions: 38" x 38" x 48"
-
Input Power: 220V/60Hz
-
Max Temp: 60 degrees Celsius
-
1700 Watt, on/off switch and over current protection
-
Suggest Temp Range: 0-60 degrees Celsius
Package Content
-
1 X 18" x 18" Flash Dryer
Features & Details
-
【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
-
【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18" x 18" (45 x 45 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
-
【PREMIUM PERFORMANCE】- Equipped with the intensive heat dissipation vents, the temperature is fixed at 400 ℃. Uniform heating makes the drying speed of the ink faster and better than ordinary machines.
-
【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30"-48".
-
【SOLID X-SHAPED BASE】- The base of the 18 x 18 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
Features
-
On/Off Switch, No Timer
-
Basic assembly tools included
-
380-degree level swivel head
-
Heavy Duty Steel Bearing Castors
-
Adjustable height floor stand from 30" to 48"
-
Double Boxed for secure and rigid packaging
-
Black Powder Coated Steel Welded Frame
-
Secure Handle for Moving the Dryer in production
-
1700 Watt, on/off switch and over current protection
-
Styrofoam padded on all sides and internally secured
-
Shrink wrapped parts in shipping box for safety in transit
-
Sturdy Base with wheels for easy use
-
Plugs into a standard wall outlet
-
Runs on standard 20 amp house circuit.
-
Powder coated finish
Technicals
-
Minimum Height: 30"
-
Maximum Height: 48"
-
Shipped Weight: 53 lbs
-
Heating Area: 18" x 18"
-
Base Dimensions: 38" x 38"
-
Top Dimensions: 29" x 19"
-
380-degree level swivel head
-
Average Current Draw: 13 Amps
-
Maximum Current Draw: 16.5 Amps
-
Average Power Usage: 1350 Watts
-
Maximum Power Usage: 2000 Watts
-
Assembled Dimensions: 38" x 38" x 48"
-
Input Power: 110V/60Hz or 220V/50Hz
-
Max Temp: 200 degrees Celsius
-
1700 Watt, on/off switch and over current protection
-
Suggest Temp Range: 140-180 degrees Celsius
Package information
-
1 X Head
-
4 X Base Leg
-
1 X Below Support Bar
-
1 X Top Support Bar
-
4 X Caster
-
2 X Handle
-
8 X Screw For Base Legs
-
1 X Base Leg Support Plate
-
Some Tool
Sign in 
