Item Information
· Thermal conductor diameter: 16MM-20MM
· Thermal material: tourmaline ceramic
· Power: 25W-39W
· Best Costume time: 3-5 minutes
· Applicable hair: dry hair
Temperature control: 6 segment
Appearence: Plastic
• Maximum temperature: 200 ℃
The lowest temperature: 130 ℃
· Type: Multifunction
· Service: one year warranty
· Heat generation: PTC
· Voltage: 110V-220
Power cord length: about 2 meters, 360 degrees rotation.
The Nexgadget hair straightener brush gives quick professional result of silky straight hair in minutes that you dreamed of, allows you get ready quickly for going out in rush morning hours, instead of wrestling with the blow dryers day after day.
This hair brush for straightening hair leaves your hair silky, straight and smooth from the very first stroke. It's heat up to 293℉ (145℃) in 30 seconds, max 392℉ (200℃) , auto keep constant temperature at 293℉(145℃), your hair will be basically settled in 8-10 seconds.
Temperature setting guide:
Customized set 266℉ (130℃) for the first time, or a soft thin hair;
Customized set 293℉ (145℃) for common slight curly hair;
Customized set320℉ (160℃)/ 338℉ (170℃) for blonde, dyeing or colored hair;
Customized set374℉ (190℃)/ 356℉ (392℃) for very thick, curly and hard to straighten;
Item Information
General voltage: 110-240V,
Frequency: 50 / 60Hz~
Power: 35W
PTC heater
Power cord length: about 2 meters, 360 degree rotation.
1. Turn on the machine in the heating state, and turn off the machine automatically 30 minutes later.
2. Heating time: it takes 3 minutes to reach the maximum temperature of 220c.
3. Press the on / off button for 2 seconds to close this item. All LED lights are off.
4. Press the on / off button for 1 second to "start up". Red light and blue light are on. By default, the low-level blue light (150C / 302F) will flash after 3S, and the machine will start to heat up. When the temperature reaches 150C / 302F, the lamp stops flashing and the two lamps are on. Press the on / off button once more, set the higher temperature 180C / 356f, and the three lights will be on when it flashes to the required temperature. Press the on / off button again, set 220c / 428f, and four lights will be on.
