18" x 24" Flash Dryer
A professionally built, excellent flash dryer. It has an 18" x 24" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "" that quickly gets a knock and stuck.
Excellent Quality
Large Drying Area
Adjustable Height
Accurate Thermostat & Sensor
Features & Details
【EXCELLENT QUALITY】- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
【LARGE DRYING AREA】- The effective heating area of the dryer reaches 18" x 24" (45 x 60 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
【ACCURATE THERMOSTAT & SENSOR】- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
【ADJUSTABLE HEIGHT】- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 24"-43".
【SOLID X-SHAPED BASE】- The base of the 18x24 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.
Specifications
Heating Area: 18" x 24"(45 x 60 cm)
Input: 110V/60Hz
Power: 2000 Watts
Minimum Height: 24"
Maximum height: 43."
Gross Weight: 75 lbs
Key Features
Extraordinary Quality
Thanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance.
Large Drying Area
The effective heating area of the dryer is 18" x 24" (45 x 60 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.
Precise Thermostat & Sensor
This flash dryer 18x24 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.
2000W Heating Tuber
2000W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.
Adjustable Height
On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range.
X-shaped Base
Compared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly.
Package Content
1 X 18" x 24" Flash Dryer with Temperature Display
