Hanging DIY Quartz Watch Silent Wall Clock Movement Quartz repair Movement Clock Mechanism Parts HQ3268 for Cross Stitch clock

Description:

Movement Hole (pinhole): Precision Hole (coarse hole)

Material: Stainless Steel, Plastic

Colour: Black

Movement Size: 5.6cm*5.6cm*1.6cm

The Total Shaft Length is 12mm and the Thread Length is 5mm.

Packing included: 1x Watch Movement

DIY Repair Clock:

Can be used to repair, replace the broken clock movement, or as a hand-made tool, this watch movement only requires a 1.5V AA battery,( 58939262,note: does not contain the battery).

The time of the needle hole is 0.55cm, the diameter of the minute hand is 0.35cm, and the diameter of the second hand is 0.1cm.

Steps for installing the hands:

The first step is to install the hour hand.

The second part is to install the minute hand.

The third part is to install the second hand, the hands are all aligned at 12 o'clock, and the pointer should be kept parallel and not rubbed.

Pay special attention to the fact that the second hand does not scratch the glass to avoid time errors.

Notification:

1 The pointers are made of thin aluminum or iron plate after one time punch, although the packaging is good, but still can not avoid being bent during long-distance transportation. If it occurs the situation, please slightly smooth it straight by fingers. It doesn\'t affect usage.

2 The installation of pointers is skillful. Three needles should be installed separately and do not overlap as much as possible. Otherwise it will affect the performance that these pointers may not walk. Please read the notes carefully before your purchase.