New Wavlink 3 in 1 WN570HN2 N300 New Wireless Repeater POA Sub-European regulations Wireless Relay Repeater

Specifications:
- Brand Name: wavlink
- Plug:EU/AU/US/GB
- Encryption mode: WPA-PSK/WPA2-PSK
- With Modem Function: No
- Max. LAN Data Rate: 300Mbs
- Supports WDS: Yes
- Supports WPS: Yes
- Voltage: 100-240V
- Type: Wireless
- WAN Ports: 1
- VPN: No
- Operating Temperature: -30°C~70°C(-22 ~158F)
- Storage Temperature: -40°C~70°C(-40~158F)

Type 1: 2.4&5GModel
Number: WL-WN570HA1 AC600Wi-Fi
Supported Frequency: 2.4G & 5GWi-Fi
Transmission Standard: 802.11ac
Standards And Protocols: Wi-Fi 802.11 g/b/n/a
2.4G Wi-Fi Transmission Rate: 150 Mbps
5G Wi-Fi Transmission Rate: 433 Mbps
Max - Transmission distance: 200m (Change with the Actual Environment)

Type 2: 2.4&2.4GModel
Number: WL-WN570HN2 N300Wi-Fi
Supported Frequency: 2.4GWi-Fi
Transmission Standard: 802.11n
Standards And Protocols:Wi-Fi 802.11 g/b/n
2.4G Wi-Fi Transmission Rate: 300 Mbps-
Max Transmission distance: 200M (Change with the Actual Environment)

Features:
- The AP/Router is mainly used for providing free WiFi service in big area such as factory, community, street or etc.
- The AP/Router multifunctional WiFi repeater router boosts your existing network range & speed,it can take an existing 2.4GHz or 5GHz wireless signal, repeater and extend it to a longer range where it is too far away for the router or access point to reach.
- External antennas provide better WiFi coverage and higher speed, while the convenient wall-plug design saves space. It works with any standard WiFi router & is ideal for videostreaming & gaming.
- Build-in High Power Technology. Support Repeater, AP, router Mode.
- Features up to 1000 mW of power and enhanced receiver design.
- Robust IP65 weatherproof casewithstands harsh outdoor conditions.
- Weather-proof RJ45 connector, integrated Passive Power over Ethernet.
- Build inlighting arrester. ( 15kV ESD ).
- Support 3 LEDs wireless signal strength.
- 2 x 2 MIMO technology.

How it works:
1. Place the straps through the slots on the back of the AP/Router and then around the pole Tighten the straps.
2. Connect one end of an LAN cable to the POE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.
3. Connect the LAN port of the power inject t a PC using another LAN cable.
4. Plug the power adapter into a wall socket.
5. The connection will be similar to the figure below after the above steps are finished.Note:-Select the wireless network with a signal strength greater than 70% to get the most reliable connection.-The outdoor antennas should be installed at a height of 2 meters above the roof or in a high open place for better reception.

Package Included:
1 x Outdoor WiFi AP/Router
2 x Antenna
1 x power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main body holder
1 x Screw fitting
2 x Cable ties
1 x Quick Installation