Features:
export to many countries
CE ,ROHS,CCC certification
Installed with EMI filter ,minimum wave
Protections: Short circuit/ Over load
Cooling by free air convection
LED indicator for power on
High efficiency and low operation temperature
Description:
Manual Switch between 100V and 240V Input. 50/60Hz
AC input: 100-120V; 200-240V.
Output: 12V/24V
+ / - 10% adjustable output voltage. Universal AC input / full range.
High Efficiency, Low Temperature.
High reliability .
Built-in EMI Filter.
Over Load and Short Circuit Protection.
Over Voltage Protection .
Auto-recovery after protection .
No Manuals or Accessories other than listed in description or pictured.
Please compare this DC output Voltage, Current with your device before bidding.
100% full load burn-in test
if you want other out put,eg Please select:
PC35-12 Output: 12V
PC35-24 Output: 24V
PC7-W1V12
Input Voltage: 100-240V
Output Voltage: 12V
Output Current:0.58A
Output Power: 7W
Size: 100*29.5*22(mm)
Weight: 0.045KG
PC12-W1V12
Input Voltage: 100-240V
Output Voltage: 12V
Output Current:1A
Output Power: 12W
Size: 100*29.5*22(mm)
Weight: 0.054KG
PC15-W1V12
Input Voltage: 100-240V
Output Voltage: 12V
Output Current:1.25A
Output Power: 15W
Size: 100*29.5*22(mm)
Weight: 0.054KG
PC15-W1V24
Input Voltage: 100-240V
Output Voltage: 24V
Output Current:0.625A
Output Power: 15W
Size: 100*29.5*22(mm)
Weight: 0.054KG
PC35-W1V12
Input Voltage: 100-240V
Output Voltage: 12V
Output Current:2.9A
Output Power: 35W
Size: 145*38*22(mm)
Weight: 0.082KG
PC35-W1V24
Input Voltage: 100-240V
Output Voltage: 24V
Output Current:1.5A
Output Power: 35W
Size: 145*38*22(mm)
Weight: 0.082KG
PC60-W1V12
Input Voltage: 100-240V
Output Voltage: 12V
Output Current:5A
Output Power: 60W
Size: 175.5*42*24(mm)
Weight: 0.143KG
PC60-W1V24
Input Voltage: 100-240V
Output Voltage: 24V
Output Current:2.5A
Output Power: 60W
Size: 175.5*42*24(mm)
Weight: 0.143KG
Package Content:
1 pcs led Switching Power Supply
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ &47μparallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation
4.Usually use this power supply to connect the leds with 80% or less of the rated power, to have a normal working state and long lifespan.
