Wenqia 433 Wireless Remote Control Switch AC 100V-220V 10A 2200W 2CH 2 gangs Receiver and Transmitter for light/ Electric door

Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door \ Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \ motor switch \ DIY
If you have any questions, please feel free to contact us.
Programming The relay receiver board has 3 operation modes, you can program as your requests.

- 1. Momentary Mode:(Usually Use for Light / LED / lamp bulb / Garage / Gate/Motor)
Description : Press and hold on button "A" ,this relay will turn on; Release the button, this relay will turn off.
Program :
1. Press the learning button(on the Receiver) once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.

- 2. Toggle Mode:(Usually Use for Light / LED / lamp bulb / Garage / Gate/Motor)
Description : Press button "A",this relay will turn on; Press button "A" again, this relay will turn off.
Program :
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.

- 3. Latched mode: (Usually Use for Light / LED / lamp bulb / Garage / Gate/Motor) Description : Press button "A", relay "1" will turn on; Press button "B", relay "2" will turn on, at the same time relay "1" will turn off.
Program :
1. Press the learning button(on the Receiver) triple. Wait for 3 seconds;2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.

- Reset:
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. After reset, all the remote controls cannot work any more.
2. Before using the relay receiver board, please stretch the antenna on it slightly to increase the signal reception range.

Relay Receiver Board Parameter

Transmitter Parameter --RF frequency : 433MHz
--Support encoding : 1527 Leaning code
--Transmitting range : Open space is more than 50 meters
--Battery : 2pcs * CR2016 ( include )

Receive DetailsRelay Reciever ( include shell )

Control Details

Remote Control ( include battery )

4 Wiring diagramS
FOR Garage/Gate/Motor/Light/Home appliance

The first Wiring diagramS
-------No Extra Power Use for Light/Home appliance

The second Wiring diagramS
------- No Extra Power Use for Motor/Electric Door

The third Wiring diagramS
------- Extra Power Use for Light/Home appliance

The fourth Wiring diagramS
------- Extra Power Use for Motor/Electric Door

Application Scenario