XH-W3002 11O-220V /12V Digital LED Temperature Controller 10A Thermostat Control Switch Probe With Waterproof Sensor W3002

Description:

100% Brand New and High Quality!

Temperature measurement and temperature control are performed simultaneously.

The upper and limits of the temperature are set to better control the temperature.

Easy to operate and easy to install.

DIY temperature electronics.

Convenient, safe and reliable, intelligent control.

Safe and practical, military quality.

Chassis cabinets, industrial equipment, a good helper for scientific planting.

P0 set start temperature

Press the setting button to enter the internal menu, the default display is PO, press the setting button again, and set the required starting temperature through the up and down buttons.

P1 set stop temperature

Press the setting button to enter the internal menu, the digital display is PO, switch to P1 by the up and down buttons, press the setting button again, and set the required stop temperature by the up and down buttons.

P2 set temperature correction

Enter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature through the up and down buttons. In the setting, if the detected temperature is 0.5°C larger than the actual temperature , the calibration temperature to be set is -0.5°C, if the detected temperature value is 1°C than the actual temperature value, the calibration temperature that needs to be set is 1°C. Temperature soil correction temperature = actual temperature.

P3 set delay start

Enter the internal menu in the sample mode, switch to P3 through the up and down keys, press the setting key again, and set the required delay time (in minutes) through the up and down keys. Delayed start is generally used for compressor refrigeration. If it is used for refrigerators and freezers, this value needs to be set. According to the compressor back pressure, the general setting value is 3-6 minutes. Time function, skip this item

Heating mode setting method

Setting essentials: start temperature

Setting method: press the setting key to enter the internal menu, set the start temperature by setting the P0 value, and set the stop temperature by setting the P1 value. Use case: control the water heater, heating to 50℃ to stop, the temperature drops to 40℃ to start heating again, how to set?

Step 1: Make sure the working mode is heating mode, starting temperature

Step 2: Press the setting key to enter the internal menu, select P0 and press the setting key to set the value of P0 to 40℃

Step 3: Press the setting key to enter the internal menu, select P1 and press the setting key, set the value of P1 to 50℃

Cooling mode setting method

Setting essentials: start temperature> stop temperature (the program automatically determines that the working mode is cooling mode)

Setting method: Press the setting key to enter the internal menu, set the start temperature by setting the P0 value, and set the stop temperature by setting the P1 value. Use cases:

Control the cabinet radiator, stop the heat dissipation at 26℃, and restart the radiator again when the temperature rises to 30℃. How to set it?

Step 1: Make sure the working mode is cooling mode, start temperature> stop temperature Step 2: press the set key to enter the internal menu, select P0 and press the set key, set the PO value to 30℃

Step 3: Press the set key to enter the internal menu, select P1 and press the set key, set P1 to 26℃

(When setting the heating mode, if you accidentally reverse the set temperature value setting, the output indicator will not light up and the load will not work. If the above situation occurs after the setting is completed, you can check whether the set temperature value is reversed)

Specifications:

Microcomputer type temperature controller.

Model: XH-W3002

Color: as shown in the picture

Input voltage:110-220 V

Output power:1500 W

Current: up to 10A

Temperature measurement range: -50~110°C

Temperature control range: -50~110°C

Input measurement: NTC10K, waterproof probe L = 1 meter

Output type: direct output

Appearance size: 6 * 4.5 * 3.1 cm / 2.4 * 1.8 * 1.2 inch

Aperture: 4 mm

Mounting hole distance: 7.3 cm / 2.9 inch

Package Included:

XH-W3002 microcomputer digital thermostat *1

1 meter waterproof probe*1