433mhz DC 3.6V 6V 12V 24V 1CH Relay Wireless RF Remote Control Switch Mini Module With Transmitter For Power LED Lamp Light DIY
Technical Data Of Transmitter:
Transmitter |
Parameter |
Material |
PVC |
Button |
1 button |
Size |
2.36*1.18 in(60*30 mm) |
Weight |
0.07 lb (25g) |
Battery |
2pcs CR2016(Include) |
Range |
Up to 50m(Theoretical Distance) |
IC Chip |
EV1527 |
Feature |
Has Keychain |
Technical Data Of Receiver Module:
Receiver |
Parameter |
Frequency |
433MHz |
Channel |
1 |
Working Voltage |
DC 3.6-24 V |
Max Current |
3 A |
Remote Controlled |
Almost 10pcs |
Size |
0.89*0.43 in(22.5*11 mm) |
Weight |
0.01 lb(6 g) |
Code |
1527 Learning&2262 fixed |
Mode |
Momentary,Toggle,Latched |
Note:The products in our store all work in 433Mhz.We can not make sure that different frequency product can connect with each other.If you have any questions about our products,please ask our customer service.We are always willing to help.
Perfect Craft & Detail Control
Free Gift
1 PCS*Cross Screwdriver
1 PCS*Electric pen
Attention Please!!!:
Every parcel only get 1 pcs as a free gift whatever how many you order.And to celebrate the opening of our new store,we will give a free cross screwdriver to every customer who places a order to us,regardless of the order amount..And for test pencil,we will send people who place a order more than 13$ USD.These items send out without retail Package ,but we will pack it well before shipped out.
The parcel will be send out according to the options you chose.We strongly suggest you to buy not only the receiver but also the wall panel in our store.The product in our store can work perfectly well.
Wiring Diagram
operating mode
You can match the Transmitter with the Relay Receiver Module in 3 modes.
Momentary Mode:
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off.
Toggle Mode:
1. Press button "A", relay will turn on;
2. Press button "A" again, this relay will turn off.
Latched mode:
1. Press button "A", relay will turn on;
2. Press button "B", this relay will turn off.
Delete the existing data about operating modes
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
2. After deleted the data, all the remote controls cannot work any more.
Set up
Set up(Momentary)
1. Press the learning button(on the Receiver) once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Toggle)
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Latched)
1. Press the learning button(on the Receiver) third times. Wait for 3 seconds;
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.
*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*
*We have our own factory.Please let us know if you have some OEM projects.We are willing to get a cooperation with you.*