PLC industrial control board digital tube machine FX1N 10MT delay module 6 input 4 output 10-28VDC with rail+Programming line

6 input, 4 point open collector outputWide supply voltage 10-28VDC

Dimensions: length X width X high:36X73X20Mm

Advantages of using PLC boards:

1 programming convenience, customers can learn to learn a day

2 reusable

3 high stability

4 easy to expand

The history of the smallest volume, the cheapest display and display panel input parameters, functions as a touch screen, touch screen is another advantage compared to the greater is the board without programming, digital display and input parameters can be fitted.

1 a power will always show the value of the data register D0 mode, the user can be used in the PLC ladder diagram MOV D D0 command to change the value of D0 can display the value of different data registers.

2 when you press the MODE button for 3 seconds on the left of the decimal point will light up into the adjustment data register number model, then through the two buttons on the right side of the increase or decrease the value, to adjust to adjust the data register number, such as D128 will be set to 100 in the pace of 128.

3 press the MODE button 3 seconds on the right side of the decimal point will light up into the adjustment step of the selected data register value model, the same through the two buttons on the right side of the increase or decrease the value, to adjust the data register values, such as D128 will be set to 100, in this step 100

4 when pressing the MODE key for 3 seconds, then enter the value pattern of the data register D0.

The latest additions are as follows:

The data register has been displayed in the D0, D2 value mode, can be displayed on the board after the MODEThree buttonsUP, DOWN, RST control 3 intermediate relay M, corresponding to the following:

RST key press, M173 conductionRST key release, M173 disconnect

DOWN key press, M172 conductionDOWN key release, M172 disconnect

UP key press, M171 conductionUP key release, M171 disconnect

Equivalent to an increase of 3 buttons, you can use the display board on the 3 buttons used when the button is used, such as the UP key used to run the motor DOWN is used to stop the motor running RST used to count cleared.

1.Integrated, systematic anti-interference processing, the power supply circuit through the design of multiple anti-jamming, without fear of all kinds of adverse electromagnetic interference working environment.

TwoUsing powerful32Bit speedARMnucleusCPU programming softwareFXGPWINor GX Developerprogramming

Can downloaddebuggingMonitor

(No software conversion, and regularPLCDownload the same way)

C Application scope:Be flexible to use in the automatic control occasions of various industries, such as metallurgy, chemical industry, industrial control equipment, plastics, textile, food, building materials, packaging, printing, carpentry, central air conditioning, environmental protection equipment and single process control equipment and other industries in the production of machinery, industrial production line, all kinds of machine tools in.

SixThis control board is10VDC-24VDCUniform mayPower supply, select type for FX1N. Input: X0-X5 a total of 6 points, output: Y0-Y3 a total of 4 points. Maximum memory capacity: 2000 stepsThe board has been sprayed with three proofing paint, better adapted to complex application environments

Module function:

This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!

Some of the common features are shown as follows:

1. Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
2. When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
3. The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 seconds after N closed off; then 2 seconds after the N relay closed off, until the next trigger, repeat the same action.
4. Through the signal 1, 2 programming, can be achieved on the relay 1 and 2 arbitrary control.
5. When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
6. Can be connected to the sensor signal such as PNP/NPN, the sensor signal programming, to achieve arbitrary control of the relay.
7. When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the control relay is controlled by a relay.
8. Turn on the power supply, control the motor is turning N seconds, and then reverse N seconds, followed by the cycle.
9. When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.

These are just some examples, modules can achieve far more than these functions

Dimensions: length X width X high:36X73X20Mm.