1PCS XGZP8 700KPa piezoresistive pressure sensor

Features
 Ranges: 0100kPa...1000kPa(015PSI...150PSI)
MEMS Technology
 Absolute
SMD package(SO8)
For non-corrosive gas or dry air
Working temp.: -10 ° +100 ° (-14°+212°)
Easy to use and embed in OEM equipment
Application
For Small household appliances field, such as electric cooker,milk machine,purifier,coffee
machine etc, medical instruments and device.
For Automotive electronics field, such as tire pressure gauge,MAP sensor etc.
For Other fields, such as massage appliance,air spring and air bed,animals blooding pressure
equipment,gastrointestinal medical device etc.
Introduction
XGZP8 is a piezoresistive pressure sensor that was designed for extremely space sensitive
application where the sensing element is to be integral to the OEM products. The core is a silicon
piezoresistive pressure sensing die that is designed and fabricated by MEMS technology. The
pressure sensing die is composed of a springy diaphragm and four resistors integrated in the
diaphragm. Four piezo-resistors build up a Wheatstone bridge structure. When the springy
diaphragm is pressured, Wheatstone bridge produces a linear voltage signal(mV) that is proportional
to input pressure.
With standard SOP8 package, It is easy for users to install by surface mounting or welding.
With good repeatability, linearity, stability and sensibility, XGZP8 is very facile for users to
calibrate output, thermal drift and make temperature compensation by using exterior operational
amplifier or integrated circuit.
The pressure medium other than dry air or non-corrosive gas can't be used directly. It is highly
prohibited to choke the side of pressure diaphragm during actual application.

Electronic Performance
Power Supply: 10VDC or 2.0mADC
Input Impedance : 4k6k
Output Impedance : 4k6k
Insulation Resistor: 100M,100VDC
Over Pressure: 1.5X Rated Pressure
Construction
Sensing Die: Silicon
Leading Wire: Gold Wire
Package Housing: PPS
Pin: Golden Plated Copper
Net Weight: Approx.0.5g
Environment Condition
Orientation: Deviate 90° from any direction, zero change 0.05%FS
Shock: No change at 10gRMS,( 58911518,202000)Hz condition
Impact: 100g,11ms
Medium Compatibility:
Pressure side: air or gas compatible with silicone, silicone glue, epoxy glue or PPS
Reference side: dry air and non-corrosive gas compatible with PPS, silicon and silicone
glue or epoxy, gold, aluminum and silver.
Basic Condition
Medium: Gas(Clean,dry air and Non-corrosive gases)
Medium Temp: (25±1) ° /(77±1.8)°
Environment Temp.: (25±1) ° /(77±1.8)°
Shock: 0.1g (1m/s2) Max
Humidity: (50%±10%) RH
Power Supply: (5±0.005) VDC