Rubrum 433MHz Universal Wireless DC 12V 4 Ch RF Remote Control Switch Receiver Module & 433 MHz Transmitter Learning Code Switch

Specifications Of The DC 3V 4CH Transmitter:

Operating RF Frequency: 433MHz. Coded System: 1527 Learning Code. Working Voltage: DC 3V. Working Current: <10mA. Transmitting Power: 10mW. Working Environment: -15 * 75 degrees Celsius. Wireless Operating Distance: 50-80m(Free Space). Color: Black. Package Size: 6.3 * 3.8 * 1.6cm / 2.48 * 1.49 * 0.63in². Package Weight: 25g/0.88oz.

Specifications Of The Receiver:

Working Voltage: DC 12V. RF Working Mode: ASK Superheterodyne Reception. Modulation Mode: ASK. Working Mode: Momentary/Toggle/Latched, etc. Matching Mode: Intelligent Learning Code. Quiescent Current: 5mA. RF Frequency: 433MHz. Output Current: <10A. Receiving Sensitivity: >104dbm. Remote Control Range: >50m (Free Space). Output Mode: Dry Contact/Voltage Output. Wired Connection Way: Fixed Wiring Pillar. Color: Green (PCB Board), White (Outside Shell). Package Size:7.5 * 5.5 * 3.0cm / 2.95 * 2.16 * 1.18in. Package Weight: 80g/2.82oz.

Wiring Port:

+V=Positive pole input. GND=Negative pole input. 1.KC1 Normal Closed of relay (NC). 2.KC1 Common of relay (COM). 3.KC1 Normal Open of relay (NO). 4.KC3 Normal Closed of relay (NC). 5.KC3 Common of relay (COM). 6.KC3 Normal Open of relay (NO). 7.KC2 Normal Closed of relay (NC). 8.KC2 Common of relay (COM). 9.KC2 Normal Open of relay (NO). 10.KC4 Normal Closed of relay (NC). 11.KC4 Common of relay (COM). 12.KC4 Normal Open of relay (NO). (When the relay is energized, NO and COM connected).

Notice:

Different Options Include Different Packages.

Operation Introduction:

About Working Mode:

Learning The Code (momentary):

Press the learning key once, the LED on the Receiver will flash once. When the LED switches on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.

Learning The Code (Toggle):

Press the learning key twice, the LED on the receiver will flash twice. When the LED switch on, press any button on the remote control, the LED on the Receiver will flash 3 times and switches off. Indicates that they are successfully paired.

Learning The Code (Latching):

Notes: Latching mode require 2 different buttons, the first one for "ON", the second one for "OFF". For example: button A = ON, button B = OFF. Push the learning key on the receiver 3 times, initiate latching mode setting. Wait for a moment, the LED indicator on the receiver will flash briefly and switches off. Push the remote button A, LED flashes 5 times. Push the remote button B. LED flashes 5 times. 3 seconds later, the LED indicator will switch on again, indicates that the remote control and the receiver are successfully paired. A = ON, B = OFF.

Receiver Code Resetting/Clearing:

Push the learning button on the receivers 8 times, the codes will be cleared. After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.

NOTES:

1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity. 2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting). 3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board. 4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.