HELLOBOX SMART S2 MINI DIGITAL BLUETOOTH DVB-S2 SATELLITE FINDER METER WITH ANDROID SYSTEM APP FOR DVB SATELLITE TV RECEIVER
how to use?
Use a coaxial cable to connect the Bluetooth finder or set-top box to the antenna.
Steps on your phone:
1. Turn on GPS.
2. If you connect a Bluetooth finder, turn on Bluetooth, connect the set-top box, open the WIFI, or move the network.
3. Open the DVBFinder APP, if you connect the Bluetooth finder, wait for the Bluetooth connection is successful, if you connect the set-top box, scan the set-top box on the two-dimensional code, and wait for the network connection is successful.
4. Select the satellite to be locked, the transponder, and set the antenna parameters correctly.
5. Adjust the direction of the arrow (azimuth) that the antenna points to the arrow displayed on the APP.
6. Adjust the antenna according to the elevation and polarization angles displayed on the APP until the signal is locked.
7. Click the scan icon to search for the program on the repeater.
Technical discription:
1.Multi standard demodulation & decoding
2.DVB-S2 CCM
QPSK+1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK+3/5, 2/3, 3/4, 5/6, 8/9, 9/10
16APSK+2/3, 3/4, 4/5, 5/6, 8/9, 9/10
32APSK+3/4, 4/5, 5/6, 8/9, 9/10
3.Legacy DVB-S,QPSK+1/2, 2/3, 3/4, 5/6, 7/8
4.VCM mode supported
5.Dummy frame insertion supported
6.Automatic standard recognition
7.Support 1 to 60Mbaud symbol rates
8.Fast channel blind scan for RF frequency & symbol rate acquisition
9.Minimized software overhead
10.High performance equalizer, canceling echo introduced by front end
11.Simple AGC – Tuner interface
12.Build in DC cancellers to remove DC component
13.IQ imbalance compensator
14.Automatic roll-off factor (0.35/0.25/0.20) detection
15.Automatic spectrum inversion
16.Signal quality and statistic, allowing improved monitoring and debug
17.Programmable parallel/serial data output interface.
18.DiSEqCTM v2.2 modulation output for full control of LNB and satellite antenna ----- Features
Signal strength and signal quality indication
Azimuth, elevation and polarization angles are automatically calculated
Multi-signal constellation
Supports GPS and electronic compass
Supports Bluetooth, WIFI and mobile networks
Supports TP search and TP recording
It Support Bluetooth BLE4.0, and compatible with above BLE4.0 protocol, BQB certification, it can through the FCC / CE standard certificati
Use your android mobile phone to scan the QRcodeof "Download App" in STB DVBFinder menu , The phone will appear to download DVBFinder.apkinformation interface, choose to download the APK and installed on the phone.
After the DVBFinder.apk is started, if the current location is not available, please check the phone if it open the GPS function; or you need to go out of the house to get the current location.
After the DVBFinder gets the position, the latitude and longitude of the current position is displayed.The red arrows appear on the screen indicate the azimuth of the satellite antenna.
adjust the satellite antenna signal strength,or to find the satellite that you need to receive
