Compatible to connect Amazon Echo, Google Home, Tmall Genie etc smart devices, turn ON/OFF your appliances trough voice-control.
The receiver is compatible with APP: ''Smart Life'', ''Tuya Smart'', ''King Smart''. Synchronous ON/OFF with APP.
Patented technology, free from wiring, anti-interference, long-distance remote control, IP54 waterproofness and one-year insurance
Saving decoration costs: The use of traditional switches in decoration will generate cost of wiring, labors and wires, and it will easily cause damage to the wall and produce waste, which is not environmental-friendly.
Easy installation: For wooden houses, the open wiring may not be neat and beautiful, and it is inconvenient and unsafe to drill for concealed wiring, with high installation cost; Elegant appearance: The open office buildings and factories always use glass curtain wall, so the wire is not easy to hide, which will destroy the overall decorative effect;
If there is a traditional switch, adding a wireless switch can achieve dual control installation.
The set means: you can control one light in different place. You can set one switch in bedside and one in doorside.
The perfect combination of wireless and wired features: In the traditional decoration, there may be situations like the missing of the switch installation, the size of furniture is not compatible with the switch, or the traditional switch is shielded which may lead to inconvenience and inflexibility, so the wireless switch is the supplementary to the traditional wired switch;
Switch remote control distance: Open area>700 M; Indoor area>50M Switch battery life: Maxell CR2032, presses >300,000 times
The on/off data of the receiver is greater than 400,000 times.
Remote control the devices: Control home appliances when in the office. Set timers to turn ON/OFF appliances, like what time to trun ON/OFF. Available to share devices to family menbers, multi-phones can control devices through app simultaneously.
Combined load. Each receiver can reach up to 1000W (LED) capacitive load (one single key switch controls one receiver and N lamps with a combined load not exceeding 1000W)
Zero-crossing triggering patented technology. The zero starting of AC power will completely eliminate sparks, which brings good protection of your lamps and effectively extends the service life of your lamps. Lightning protection, which forms resistance to 3 hours of 380V high voltage and instant 5KV shock
1 one-gang switch controls 1 receiving controller
2 two-gang switch controls 2 receiving controllers
3 three-gang switch controls 3 receiving controllers
One master switch control. Press the left button to turn on and press the right button to turn off.
3 one-gang switch controls one receiving controller
2 two-gang switch controls 2 receiving controllers. One receiving controller can be connected with 8 different switches. There are also many other combinations, depends on your needs.
Use receiver into EZ mode 1. Press and hold the key on receiver around 5s 2. LED indicator blinks in red →in green, then loosen your grip 3. Open King Smart APP, login your account. 4. Tap "Tap+ Add Device" 5. Choose EZ Mode, Tap"Confirm green indicator rapidly blink" 6. Enter Wi-fi Password, Tap" NEXT" 7. The phone is connecting the device 8. After connecting , Tap control the lamps
Use switch into EZ Mode 1.Press and hold paired switch for around 30s 2. LED indicator blinks rapidly then twice slowly, loosen your grip 3. Press the switch again 4. LED indicator on receiver blinks in green rapidly 5. Open King Smart APP, login your account. 6. Tap "Tap+ Add Device" 7. Choose EZ Mode, Tap"Confirm green indicator rapidly blink" 8. Enter Wi-fi Password, Tap" NEXT" 9. The phone is connecting the device 10. After connecting , Tap control the lamps
Press and hold receiver button for 2s, loosen your grip when LED indicator blinks in red, press a switch to pair, Switch open and learning success.
Press and hold paired switch for around 20s LED indicator blinks rapidly, then loosen your grip, press a new one to pair, Switch open or close and learning success.
Press and hold paired switch for around 60s, LED indicator changes from; blinks rapidly → secondly 8 times slowly → thirdly blinks 9 times at slower speed → finally once at slowest speed ,then loosen your grip, press the switch again, switch open or close and delete success.
