LiitoKala Lii-500S battery charger 18650 charger For 18650 26650 21700 AA AAA batteries Test the battery capacity Touch control
Lii-500S Features
1. New touch control function;
2. Four optional charging currents: 500mA*4/700mA*4/1000mA *4/2000mA*2;
3. Two discharge currents: 250mA*4/500mA*4;
4. It can charge different batteries of different specifications (18650/26650....../AA/AAA);
5. This product uses a separate LCD display, charge and discharge mode (MODE). Voltage (V).
Current (mA). Time (h). Capacity (mAh) parameters, at a glance;
6. CHARGE, DISCHARGE and TEST modes can work simultaneously; independently set
charge/discharge capacity detection/normal capacity detection function;
7. A variety of protection functions: overcharge and over discharge, short circuit, temperature,
0V voltage activation function,( 58901223,-ΔV & 0ΔV), 1.65V-2.2V non-charging function, intelligent identification
of bad battery and reverse battery detection protection;
8. With standard 5V/1000 mA USB output function (only valid when AC power is connected);
Lii-500S Parameters
Input voltage: DC 12V/3.0A
Output voltage:DC 4.2V / DC 1.48V
Output current
Lithium battery charging current: 500mA*4 /700mA*4/1000mA *4 2000mA *2
NiMH battery charging current: 500mA*4/700mA*4 /1000mA*4
Rechargeable battery specifications: 26650,21700,18650,18350, 20650,14500, AA, AAA, etc.
Discharge current: 250mA / 500mA
USB output: 5V---1000mA
Termination method: intelligent voltage monitoring
Dimensions: 162mm (length) * 100mm (width) * 36mm (height).
Order description
Lii-500S and adapter:Lii-500S charger + 12V/3A adapter + manual
Lii-500S Full: Lii-500S charger + 12V/3A adapter + 12V Car Cable + manual
Note: The results of the Lii-500S charger test are for reference only and do not make any professional proof.
Product Image:
Instructions for use :
When the charger is powered on, the LCD screen of the charger will be fully illuminated at all times, and the 1/2/3/4 channel LED will prompt red and green to be ready. If the battery is not placed, "Null" will be displayed, if it is bad. When the battery is placed or the battery is reversed, "Err" will be displayed. The battery is working normally. The red LED is always on, the battery is full or the green LED is off.
CHARGE (charging mode)
When the charger is put into the battery and the power is turned on, the system automatically enters the charging mode (CHARGE). The charger automatically defaults to a charging current of 500mA. In 8 seconds, you can select 500mA, 700mA, 1000mA, 2000mA through the current touch point (CURRENT). The second channel is optional. The current is charged. The system will lock the current of your choice for charging after 8 seconds. If the setting is not made within 8 seconds, the system will automatically charge with 500mA current by default. The function will not be able to be changed. If you need to change it, you need to touch MODE to reselect it.
In the charging mode (CHARGE), the independent charging or different current selection can be arbitrarily changed within 8 seconds, and the different batteries can be mixed; the operation is simple, the touch points of 1, 2, 3, 4 batteries are touched within 8 seconds, and then the MODE is changed. Mode, touch CURRENT point to change current, independent, mixed charge, capacity detection function, enter the working state 8 seconds after selection, pay attention to the charging current according to the battery capacity, if you do not need fast charging, please select 500mA current charging, Because small current charging is the safest;
In the charging mode, you can check the charging power (mAh) / charging time (h) / charging current (mA) / voltage (V) by tapping the 1, 2, 3, 4 touch points. After the battery is fully charged, it will be displayed. "End" (end of charge);
(Note: When charging with 2000mA current, it can only charge up to two channels and only lithium-ion battery. When charging 3-4 batteries at the same time, the maximum current of the charger is 1000mA.)
DISCHARGE (discharge mode)
When the charger is placed in the battery and the power is turned on, touch (MODE) to select (DISCHARGE discharge mode) within 8 seconds, then touch (current CURRENT) to select the required current (250mA or 500mA). If no current is selected, The system automatically defaults to a discharge current of 250mA, and the system will lock your choice of work after 8 seconds. The system will record the data at the time of discharge to detect the battery discharge capacity.
TEST (capacity detection mode)
The TEST mode is the capacity of the test battery. The charger will do a charge and discharge cycle of the battery to test the true capacity of the battery.
In any state, if you touch the MODE "beep" sound, you can enter the TEST mode.
After entering TEST mode, 500mA, 700mA, 1000mA, 2000 mA current can be selected through the current touch point (CURRENT) within 8 seconds. The system will lock the current of your choice after 8 seconds, if within 8 seconds, it will not be made. Set, then the system will automatically lock the 500mA current charge (the selected current is the system default charging current). (Note: NiMH battery does not have 2000mA current file)
When the battery is fully charged, the system automatically switches to discharge, the discharge current is fixed at 500 mA, and the data at the time of discharge is recorded to detect the discharge capacity of the battery.
When the battery is discharged, the system automatically switches to charging. The charger will charge the battery again with the previously selected current parameters, and record the data during charging to detect the battery charging capacity. At this point, the system displays "END" to stop charging.
(Note: When charging with 2000mA current, it can only charge up to two channels and only lithium-ion battery. When more than two channels are used, the system will automatically charge the charging current of 2000mA charging channel to 1000mA current charging.)
Note: The results of the Lii-500S charger test are for reference only and do not make any professional proof.
Order description
Lii-500 and adapter:Lii-500 charger + 12V/2A adapter + manual
Lii-50S Full: Lii-500 charger + 12V/2A adapter + 12V Car Cable + manual
Order description
Lii-PD4 Full:
Lii-PD charger + 12V AC
cable
+ manual
Shipping list:
Lii-S4 Charger*1
USB cable*1
5V 2A plug*1
Instruction manual*1
Shipping list:
Lii-S2 Charger*1
USB cable*1
5V 2A plug*1
Instruction manual*1
Lii-402 List:
1, Liitokala Lii402 whole package:
Lii402 charger + USB cable
5V 2A charging plug
manual
Lii-202 List:
1, Liitokala Lii202 package: Lii202 charger + USB cable + 5V 2A charging plug + manual
