wireless wi-fi 802.11n 300mbps 2.4g firewall home router repeater extender repetidor booster for xiaomi wi fi wifi versterk

wireless wi-fi 802.11n 300mbps 2.4g firewall home router repeater extender repetidor booster 4g for xiaomi wi fi wifi versterker

Features

WLAN access point/client according to IEEE 802.11n/g/b. 110 ~ 230-volt socket. The WLAN client must support at least the WPA encryption standard. WLAN access point and the WLAN client with automatic IP address assignment(DHCP). Forwarding of IPv4-based protocols/Address Resolution Protocol. The network name (SSID) of the WLAN access point must be set to ''visible''.

Specifications

Plug Type: EU Plug Wireless Standard IEEE802.11b, IEEE 802.11g, IEEE 802.11n Modulation 802.11b: DSSS / BPSK / QPSK / CCK 802.11g: OFDM / DSSS / BPSK / QPSK / CCK 802.11n: OFDM / DSSS / BPSK / QPSK / CCK Speed 802.11b: 11Mbps 802.11g: 54Mbps 802.11n: 300Mbps Channel 11: (Ch.1-11) - USA 13: (Ch.1-13) - Europe 14: (Ch.1-14) - Japan Frequency band 2.412~2.462GHz -USA 2.412~2.472GHz -Europe ETSI 2.412~2.484GHz -Japan Power 802.11b: 17dBm ± 1.5 dBm 802.11g: 14dBm ± 1.5 dBm 802.11n: 14dBm ± 1.5 dBm Sensitivity 802.11b: -83dBm /802.11g: -70dBm / 802.11n: -68dBm Antenna 2 x 3dBi Integrated Antennas Distance Outdoors 300m, Indoor 100m (According to the actual environment change) Security 64/128-bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS Software Standard Version RFC768 User Datagram Protocol(UDP) RFC791 Internet Protocol(IP) RFC792 Internet Control Message Protocol RFC793 Transmission Control Protocol(TCP) bandwidth: 20MHz, 40MHz, Automatic(option) Wireless Mode: 11n only, 11 b/g/n mixed, 11 b/g mixed, 11g only, 11b only(option) Mode AP Mode / Repeater Mode Wireless Security Wireless MAC address Screening Wireless security function switch 64/128/152-bit WEP WPA-PSK/WPA2-PSK, WPA/WPA2 Function IP bandwidth control (Router mode support) DNS Relay (Router mode support) VPN Pass-through (Router mode support) Static Router (Router mode support) DHCP Server (Router mode support) DHCP settings Server list (Router mode support) Static IP address allocation (Router mode support) Security Settings IP and MAC address binding against ARP attacks (Router mode support) IP address Screening (Router mode support) Name Screening (Router mode support) MAC address Screening (Router mode support) System Tools Traffic statistics System Journal Hardware Ports 1 x RJ45 Jack Button Reset WPS LED 1 * LAN, 1 * WLAN, 1 * Power, 1 * WPS Chipset RTL8196E Flash 16Mbps SDRAM 128Mbps Power supply Internal DC5V / 1A Power plug EU plug Power consumption 2.3W Rated voltage/ frequency /current 100-240 VAC 50/60Hz, 0.1A Max., Environmental Operating temperature 0 ~ 40 Celsius degree Storage temperature -10 ~ 70 Celsius degree Relative humidity 10% ~ 90% (Non Condensation)

Note

Please check whether the WiFi-Repeater accord with factory default settings once you can't download 192.168.1.1 if you are still not sure what reasons,you can reset the WiFi-Repeater,just need to press the reset button for 10 seconds,then try again.

Package Contents

1 * Wireless-N repeater