TRAVOR gimbal stabilizer hand gimbal smartphone stabilizer tripod selfie stick single axis handheld stabilizer for telphone
product properties:
Model No:H5
Material:ABS+AL
Playload:300g
Net Weight:230g
Battery Capacity:Li-ion 450mAh
Charging Port:Micro USB
Charging Voltage:5V
Working Current:100mA~2100mA
Operation Time:2H
Charging Time:1H
RCU Control Distance:Within 10m
RCU Battery:Lithum Cell CR1632
RCU Modulation Type:GFSK
Product Size:190*70*40mm
Extension Length:580 mm
Attention!
1.If the gimbal is not well-balanced before turn on,it would be over heat or cause excessive power consumption.
2.Bluetooth RCU goes into sleep mode automatically if there is no any operation within 10 minutes,and click the power key to wake it up.
3.When the battery of gimbal is low,the red LED is flash,please charge the gimbal.
4.when the battery of RCU is low,the red LED turns on,please change the cell battery of CR1632.
5.If the machine has been undergone drastic temperature or humidity changes and the gimbal is not being in balance level after power on,the gimbal should be calibrated again as below: Turn off gimbal and remove the gimbal unit out of stick,then put it on a flat table,power it on,click the power key 5 times in succession,the gimbal shall make 3 short beeps plus 1 long beep,then boot up again,gimbal function recover to the nomal status successfully.
packing listing：
1x Stabilizer
1x Charging Cable
