Attention:
It can not support Ford/GM/Holden.
Highlights:
1. Latest Version V17.8
2.English / Spanish Optional , Blue & Black Optional
3. No Tokens Limitation
4. Do Not need original Key ( EVEN if you lost all keys )
5. Support multi-brand cars before 2007 very well.
Functions:
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
4. Read IMMO/ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
10. ECU-IMMOBILISER programmer
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implement
T300 Key Programmer Install Steps:
For VW Transponder key matching with 5 digits Login CodeProcedure for adding transponder keys to vehicles
with separate Immobilizer box:Switch ignition ON with new key. Select: Immobilizer -> Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 1234.
Save
Go to Adaptation
Enter 01 in "Channel Number"
Enter
The "Stored Value" is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched, - for ex 2 ;
Enter -> Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
Enter 00 in "Channel Number"
Enter 0 and Save. This will learn ECU with Immobiliser.
Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:Switch ignition ON with new key. Select: Instrument -> Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 01234.
Save
Go to Adaptation
Enter 21 in "Channel Number"
Enter
The "Stored Value" is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched, - for ex 2 ;
Enter -> Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer -> Login. Enter Login Code. Go to Adaptation
Enter 00 in "Channel Number"
Enter 0 and Save. This will learn ECU with Immobiliser.
Supported Vehicle List:
For ACURA Japan
For AUDI Germany
For ALFA Italy
For BUCK
For CHEVROLET
For CITROEN France
For CHRYSLER
For DODGE
For DACIA USA
For DAEWOO Korea
For FERRARI
For EXCELLE
For FIAT Italy
For GENERAL MOTORS USA
For HONDA
For HYUNDAI Korea
For ISUZU
For IVECO Japan
For INFINNITI Japan
For INFINNITI CAN-BUS Japan
For JAGUAR England
For JEEP
For KIA Korea
For LAND ROVER England
For LANCIA Italy
For LDV
For LEXUS Japan
For LINICOLN USA
For MAZDA USA Japan
For MAZDA M6 Japan
For MERCURY USA
For VALKSWAGEN
For MITSUBISHI Japan
For NISSAN Japan
For PEUGEOT Franc
For RENAULT France
For PROTON
For PONTIAC
For ROVER
For SUBARU England
For SEAT Spain
For SKODA Czech
For SUZUKI Japan
For SUZUKI
For TOYOTA Korea
For TOYOTA
For VW Germany
Package List :
1 * t300 main unit
1 * OBD2 Cable
1 * for suzuki adapter
1 * for mitsubishi adapter
1 * for nissan cable
1 * for daewoo cable
1 * cigarrate cable
1 * for vag 2*2 cable
1 * for nissan cable
1 * for honda cable
1 * for honda adapter
1 * for hond-3pin adapter
1 * for chrysler 138 adapter
1 * for chrysler 139 adapter
1 * for nissan adapter
1 * for peugeot adapter
1 * Self Test Adapter ADC-145
