Kindly note, our remote is the COMPATIBLE / REPLACEMENT /CLONE remote , not the original one .
please make sure your remote / system can be used before buying .
As a general guide, if the remote you currently use is one of the remotes pictured in the ad then this remote will be compatible with your motor.
if you are not so sure , please contact us without hesitate
1.Type of programming: Programming with the receiver
2.Number of channels: 4
3. Code: rolling code
4. Frequency: 868.35MHz
5.Woring Range: 10-50 m (open space)
6.Power supply: CR2032.
7.Remote come with Battery !!!
Security of use: dynamic code provides a high level of security, non-copyable code.
Disclaimer:Your Old remote must be same as the advertisement , new remote do not compatible with other remotes .
SOMMER 4011
SOMMER 4020 TX03-868-4
SOMMER 4025
SOMMER 4025 BLUE
SOMMER 4026 TX03-868-2
SOMMER 4031
SOMMER 4035
APERTO 4021
APERTO 4025
SOMMER 868MHZ Remote Programming:
Program to Gate / Garage Door Openers the same way as original SOMMER remotes, please refer to your receiver's user manual. For a typical SOMMER Radio Receiver FM 868.8MHz, the programming procedure is as follows:
1. Press the LEARNING button on the radio receiver or on the control panel, once for channel one, LED 1 lights up, twice for channel two, LED 2 lights up.
2. Make a transmission by pressing one of the desired CH buttons of the transmitter (within the range of the radio receiver). LED flashes and then extinguishes according to which channel has been selected.
3. Repeat process described under points 1 + 2 to teach further manual remote controls on to given radio receiver. Max. 112 memory slots are available.
4. Press the transmitter button to test operation.
Note: To remove a single transmitter's code or all transmitter codes from the receiver memory please refer to your receiver manual.
Remote Control
Battery
Keychain
English Manual
