[Smooth surface without burrs] Mosaic tile stickers, made of high-quality materials, good wear resistance, smooth surface, no wear marks, no burrs, and long service life
[Use] Crystal glass mosaic can be used in swimming pools, pools, fish ponds, exterior walls, balconies, ceilings and floors, bathroom places, etc.
[Eco-environmental protection] The raw materials are all made of natural ore materials, crystal clear, no industrial additions, acid and alkali resistance, fireproof, waterproof, non-radiation and easy to clean, durable
[Mosaic paving method] It is necessary to prepare glass horse glue. After calculating the area, mix the auxiliary materials (glass horse glue) with water, and evenly apply the auxiliary materials to the wall. After the mosaic is glued to the wall, the distance between each piece should be the same After the pasting is completed, please use the auxiliary tool to knead until it is firm. One hour after caulking, clean the material on the surface of the mosaic with a warm towel. The final setting of the mosaic is about 24 hours.
[Daily cleaning] You can wipe the mosaic with clean water as a daily ordinary environmental protection. If you encounter stubborn stains under certain circumstances, you can use a stone cleaner, but you must pay attention to cleaning with a lot of water after cleaning.
Specification:
Style: SL0073, SL0076, SL0081, SL0084, SL0090
Material: crystal glass
Density: 1000 (g/m3)
Water absorption: 2 (%)
Corrosion resistance: excellent
Freezing resistance: excellent
Thermal shock resistance: excellent
Special purpose: non-slip
Net weight: 650g
Gross weight: 660g
Product size: 30*30cm
Packing method: boxed
Packing size: 30.5*30.5*9cm
Packing list: 1*wall sticker
Instructions for paving construction steps:
1. It is recommended to use professional adhesives and joint fillers for our products, and some products should use neutral adhesives. (Please pay attention to the instructions in the package)
2. After cleaning the paving base surface, use a professional gray force to scrape 2-3.0MM thick phase paste adhesive.
3. Use a toothed bun knife to scrape wavy stripes on the smoothed paste adhesive.
4. Pave and paste the mosaic, pay attention to the width of the seam between the joints and the product itself.
5. Lightly press the mosaic surface to make it flat and eat evenly
6. After about 20 hours, Marenko completely condenses with the binder. Use a sponge bun knife to fill the gap with the caulking compound. (Soft tools avoid scratching the product surface)
7. After about half an hour, when the caulking material is in a semi-dry and wet state, use a high-density sponge soaked in clean water to wipe into the 1-2MM recesses, which can better highlight the product's refractive effect.
8. Finally used for dry towel cleaning to complete the construction.
Packing list: 1*wall sticker