ESD5500E diesel generator speed control unit ESD5500E (all parts Made in CHina )

ESD5500E diesel generator speed control unit

esd5500e diesel generator speed governor controller ALL PARTS MADE IN CHINA Description---- The ESD5500E/5520ESeries speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes. *ESD5520E is designed for CUMMINS EFC series. *Isochronous Operation/Steady Stability---- +/-0.25% or better *Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected) *Power Consumption----50 ma continuous plus acutator current *Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous Input Supply 12 or 24 VDC Battery System (Transient and Reverse Voltage) Polarity Negative Ground (Case Isolated) Power Consumption 50 ma continuous plus actuator current Actuator Current Range @ 25 Deg. C - (Inductive Load) Min.2.5 Amps; Max. 10Amps continuous Speed Sensor Signal 0.5-120 Volts RMS Performance Isochronous Operation/Steady State Stability ±0.25% or better Speed Range/Governor 1K to 7.5K Hz continuous Speed Drift with Temperature ±1 Max Idle Adjust CW 60% of set speed Idle Adjust CCW Less than 1200 Hz. Droop Range 1-5% regulation Droop Adj. Max. (K-L Jumpered) 400 Hz., ±75Hz. Per 1.0A change Droop Adj. Min. (K-L Jumpered) 15Hz., ±6Hz. Per 1.0A change Speed Trim Range ±200 Hz Remote Variable Speed Range 500 - 7.5 Hz. Or any part there of Terminal Sensitivity J 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance Terminal Sensitivity L 735 Hz., ±60 Hz / Volt @ 65 K Impedance Terminal Sensitivity N 148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance Terminal Sensitivity P 10 VDC Supply @ 20 ma Max Environmental Ambient Operating Temperature Range -40 to +85 Deg. C Relative Humidity Up to 95% All Surface Finishes Fungus Proof and Corrosion Resitant Reliability Vibration 1G at 20 to 100 Hz. Testing 100% Functionally Tested Physical Dimensions See outline (FIGURE 1) Weigh1 1.2 lbs.(545 grams) Mounting Any position, Vertical Preferred