Quantity(Set/Sets) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Programming Use for Garage door/Gate/Projection Curtain/MotorDescription;
Press button "A",The Garage door/Gate/Projection Curtain/Motor Will be turning forward; Press button "B",Garage door/Gate/Projection Curtain/Motor Will be turning reverse;Press button "C",Garage door/Gate/Projection Curtain/Motor Will bestopping.Setting :
1. Press the learning button on the Receiver board 3 times.
2. Press button"A"on the Remote Control, Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use;
3. Press button"B" on the Remote Control .Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use;
4.Press button"C" on the Remote Control .Wait 3 seconds, the LED indicator will turn on again , indicating system is ready for use.
Note: Reset the receiver before you want to change the operating mode of one remote control.
- Reset:
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. After reset, all the remote controls cannot work any more.
2. Before using the relay receiver board, please stretch the antenna on it slightly to increase the signal reception range.
Relay Receiver Board Parameter
Transmitter Parameter
--RF frequency : 433MHz
--Support encoding : 1527 Leaning code
--Transmitting range : Open space is more than 50 meters
--Battery : CR20321pcs ( include )
Receive Details
Relay Reciever ( include shell )
Details Control
Remote Control ( include battery )
2 Wiring diagramS
FOR Garage/Gate/Motor/Home appliance
The First Wiring diagramS
------- No Extra Power Use for Motor/Electric Door/Home appliance
The Second Wiring diagramS
------- Extra Power Use for Motor/Electric Door