Product information
1. product name ： led back light house number
2.Stainless Steel Color ： Black / Sliver
3.Emission color ：White / Warm White（you can note the lighting color when you place the order）
4.Size ： height 12.5cm , 16cm, 20cm, 25cm , 30cm
5.Transformer ： input 110-240V , output 12V
6.Provided ：
Product , installation tools ,screw , Installation drawings. 1000mm extend wire （if you think it is short , please measure your wall and note the wire length）
7.Waterproof Led ligth source with CE/Rohs cetification
Color temperature: 10000K / 3000k-4000k
8.life Span ：100000 hours
Note:
1.Once an order is placed for customized services, refunds are not supported.
2.if you choose time controller option ,
You need to adjust the time when you receive the time controller. After that, the house number will automatically turn on and off at regular intervals
3.Regarding installation issues,
because everyone's installation environment is different. So if you encounter problems with installation, please feel free to contact customer service. We will solve the problem for you.
4.Regarding Power Supply ，
if your house donot have the power supply ,you need to click the power supply option .
5.Reegards house letter.
If your house number need letter , you can choose the "A -Z" option , then note the letter you need when you place the order
If you buy two or more numbers in an order, you will get a free power supply.
Recommend:
Stainless steel black and warm white light are the best match
Note ：
1. The seller recommends font 1 (in stock)
2. When you place an order, please mark the font you like. Otherwise, it is the default font 1
Step 1 : Paste the drawing on the wall
Step 3 :Fix the white nut on the number
Step 4 : Wire Function
Red / white / brown is postive electrode .
Black / white&black wire is negative electrode.
Positive connect to positive
Negative connect to negative
Step 5 : Connect the wire
Tangle wires of the same color together
Step 6 : Connect the power supply
White wire connect brown
Whire&black wire connect black
Installation note:
1. The power supply is best placed behind the wall or behind the board
2. If you have too many letters, please extend the wire. The specific operation is as follows
3. A general principle:
Connect wires of the same color
Black is negative
Red is positive
