Product introduction
The automatic banner welding machine is designed to weld plastic materials. It can weld advertising inkjet fabric, inkjet cloth, light box cloth,PVC banner cloth,plastic cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sener can always monitoring the temperature of the outlet to keep a constant temperature.
It uses advanced PID control technology, and adjust the power to make the temperature more constant
automatically,the fluctuation is within 1 degrees. This function can make the welding result stronger. It also
can avoid leakage.
Technical Parameters
|
Voltage/Frequency
|
110V/220V / 50 Hz-60Hz
|
|
Rated power
|
1800W
|
|
Air volume
|
21m³/h
|
|
Air pressure
|
2500 Pa
|
|
Welding temperature
|
20-700 degree
|
|
Welding speed
|
0.5-8 m/min
|
|
Welding thickness
|
0.2-2mm
|
|
Welding width
|
2-4cm
|
|
Net weight
|
14Kg
|
|
Packing Size(L*W*H)
|
488*288*280mm
|
Operation Step:
1. Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
2. The overlap width of the two pieces is about 3 mm,the width of the nozzle of hot seaming machine.
3. Put the machine nozzle between two overlap pieces, the press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
4. Switch on the motor power and then adjust speed.
5. Turn on the movement switch.
6. Press heating power key to adjust temperature.
7 Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
8. Turn the bar by clockwise to cease the automatic work.
9. The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.
More details:
Our Exhibition Show
