Kind Note:
for the motor, if 24V shown, it means, no transformer inside, support solar panel powered. for the rest, if not stated 24V , there is transformer inside, change 220V or 110V into 24V for motor, that's to say, it works with 220V or 110V.
1.Durebale and silence in motor operation.
2.Clutch device for power failure,use a special key release clutch,operate the gate manually.
3.Stop working when gate meets obstacle.
4.Soft start and soft stop ,avoid some accidents
5.Adjustable opening/closing interval between master and slave gate.
6.Adjusting residence sensitivity
7.24VDC Swing gate opener can work for solar power system and back up battery
Product Name
|
Swing gate opener PKM C05
|
Material
|
aluminium tube
|
Motor power
|
24VDC 40W
|
Max single-leaf length
|
2.5M
|
Max single-leaf weight
|
150-200kg
|
Rod's max travel
|
300mm
|
Protection class
|
IP55
|
Noise
|
50dB
|
Basic Automatic arms swing gate motor kit includes:
2 x DC gate motor that are pre-wired with motor cables
2 x Override spanners
2 x Remote controls
1 x Control panel
2 x Post mounting bracket
2 x Gate mounting bracket
1 x Rubber Gate Stop
1 x Instruction manual
This is the basic package content, anyhow, for spare parts,like alarm light, photocells, push button, gsm door opener, if shown in photo clicked, it is included, otherwise, not included.
Solar power system
Solar panel, solar charge controller and back up battery can make your motor operate with out traditional power supply.
Battery Capacity: 12V 5AH
Soalr panel
Max. Power 20.0W
Max. Voltage 17.0V
Max. Cureent 1.18A
Open Circuit Voltage: 21.6V
Photocell
Features
1. The photocells should be installed at height of more than 20cm above the ground.
Wireless Keypad
Touch Sensor Bottons or Digital keys
Compatible With Most Of Fixed Codes&Rolling Codes
Two Channel Output
LED Indicator&Backlight
Security Lockout
IP Rating 53
2G/3G GSM Controller
1. No call charges
2. Multipleapplications.
3. Secure.
4. Can be operated from anywhere, no distance limit.
5. Add or remove users by Simple SMS Text command.
6. Up to 99 authorized phone numbers can be configured.
7. Two Digital inputs for door sensor, motion sensors or other sensors to protect your door and windows.
Advantages of remote control swing gate motor controller :
1.Control board can connect flashing light,and photocell,and back up battery,solar system,and keypad and so on.
2.Controlling single or dluble-leaf motor is optional.
3.Can adjust open and close door time.
4.24VDC back-up battery can be input.(this is use large controller,our standard controller is small size.)
5.High speed operate can be adjustment.
6.Set extra remote control is easily,up to 30pcs remote control.
7.As for remote control : button 1 is open,stop,close one gate,button 2 is for open,stop,close two gates.
1. 2 SIDE terminal is used for connecting any external device that operates single gate
2. COM terminal is COMMON used for connecting the “ground” of external devices
3. 1 SIDE terminal is used for connecting any external device that operates double gate
4. Swipe Card terminal is used for connecting any external devices that will operate to open the gate
5. COM terminal is COMMON used for connecting the “ground” of external devices
6. Infrared terminal is used for connecting photo electric sensor
7. 12V DC output is used for connecting photo electric sensor (Continuous output current <=200mA)
8. 24V battery output is used for connecting the back up battery +
9. 24V battery output is used for connecting the back up battery -
10. 24V DC output is used for connecting external device. (such as photo electric sensor, max current output 1A)
11. GND is used for connecting the “ground” of external devices
12. 24V DC lamp output is used for connecting flash light +.
13. 24V DC lamp output is used for connecting flash light -.
14. 24V DC lock output—the NF terminal which used for connecting the electromechanical lock
15. COM is COMMON used for connecting the “ground” of lock
16. 24V DC lock output—the NA terminal which used for connecting the magnetic lock
17. 24V DC alarm output
18. 24V DC alarm output
19. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 1st red wire (counted from your left hand side to right hand side)
20. Motor1 terminal is used for connecting the motor 1 installed on the gate that opens later and close first. This terminal connect 2nd blue wire (counted from your left hand side to right hand side)
21. Motor2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. This terminal connect 1st blue wire (counted from your left hand side to right hand side). NOTE! If for single gate, the gate motor just can connect the Motor2 Delay terminal.
22. Motor2 Delay terminal is used for connecting the motor 2 installed on the gate that opens first and close later. This terminal connect 2nd red wire (counted from your left hand side to right hand side).
23. AC24V input is used for connecting the transformer
24. AC24V input is used for connecting the transformer
25. digital display is used for showing you the setting data
26. INC+ is used for figure increase when setting the data
27. FUN is used for store the data
28. DEC- is used for figure decrease when setting the data
29. Learning button is used for program/remove remote
connection map for reference
installation example, swing gate opener might be different, but it's installed the same way, it can be installed inside or outside of gate.