Note 1. Shipping costs shown include fuel surcharges. But Import duties, taxes and other customsrelated charges are not included. Buyers bear all responsibility for all extra charges incurred (if any).
2. The picture is only for reference,the price is 1 Piece
|
For Glass Thickness
|
Installation
|
Surface
|
Grade
|
Part Code
|
|
5/16,3/8,1/2,9/16 inch
|
Deck Mount
|
Mirror Polish
|
Stainless steel Duplex 2205
|
BESTGM2-1
|
Material: Stainless steel Duplex 2205
Surface: Mirror Polish Finished
Installation: Deck Mount
Through integral cast forming, our spigots has the advantages of high strength and safety
No Holes required for glass panels
Suitable for Glass Thickness 8mm,10mm,12mm,15mm Or 5/16 inch,3/8 inch,1/2 inch,9/16 inch tempered glass panels
Easy installation - DIY focused
All products are tested and approved to European Standards.
5 Years WARRANTY
Polished by hand to assist in making a quality part. In the passivation process after buffing, acid and rinsing remove surface contaminants from the products and produce a hydrous oxide film which enhances corrosion resistance. Every production shipment tested and certified
Due to the number of varying mounting conditions, anchors and mounting screws are not supplied
About Stainless steel Duplex 2205
Duplex stainless steel 2205 provides pitting and crevice corrosion resistance superior to 316L or 317L austenitic stainless steels in almost all corrosive media. It also has high corrosion and erosion fatigue properties as well as lower thermal expansion and higher thermal conductivity than austenitic.The yield strength is about twice that of austenitic stainless steels.
Based on tests done to the ASTM B117 method suggest a Duplex 2205 type part could be expected to pass a 480 hour test using a 0.3% salt spray
