0 Piece,Product Price: US $ 0
Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Appearance: food-grade 304 stainless steel wire drawing board
Operation instruction:
1. Turn on the power(220v), the heater will be heated according to the temperature controller set
temperature, when the heater temperature reaches the set temperature, the heating is stopped
automatically.
2. Open the motor switch, the machine will automatically idling, after half a minute, the oil slowly into the funnel crumple grinding axes. When you see the cake became tubular in cake mouth,
Indicating that the shaft has been grinding heat, then you should put the material into the funnel,
the machine will complete the full process.
3. Upon completion of oil, then you need use broken cake into the funnel, to push the pressing chamber internal materials net. Next, make the machine idle for 1 minute, and make it completely discharged diesel, Finally, stop the motor, cut off the power.
Temperature controller:
Upload the temperature in the temperature controller, you should under normal display measurement,
press the SET, when the display the window at the end of blinking, you can into the current state of the setting value, shows the current setting value, then press and hold page up increase the temperature,
hold page down , reduce the temperature. With the shift keywith the completion of the temperature seeing,
press SET to determine the current temperature setting.
Adjustment screw gap:
After the tail hexagon screw M10*50 random rotation to adjust the cake mouth clearance.