The process and precautions of the stretch blowing machines when making plastic bottles
The process and procedures of the pure water bottle plastic blowing machine in making plastic bottles are mainly:
1. The first is to irradiate the preform through an infrared high temperature lamp, which can better make the preform of the preform, but the mouth of the preform does not need to be heated, so as to better maintain the shape of the bottle mouth. Cooling device to cool down.
2. Once again, put the preheated preform into the blow mold that has been prepared, and then inflate it with high pressure, so that the preform can be blown and drawn into various shapes of bottles that people need to meet the needs of people. people's needs.
Matters needing attention before using the pet bottle blowing machine:
1. When people use the blow molding machine, they should carefully check whether the power supply, control system, heating system, etc. of the blow molding machine are in normal state, and for the parts that need to be added with lubricating oil, it is necessary to add an appropriate amount of lubricating oil to ensure normal use and operation of the equipment.
2. When using the blow molding machine, the mold should be accurately installed on the blow molding machine, and it should be carefully checked whether the button is already in the exact position, and it needs to be started, debugged or operated according to the specified requirements. Machines and equipment operate and work under normal conditions.
