SEAV TXS 1,TXS 2 / SEAV TXS 3,TXS 4 / SEAV TXS 6 garage door remote control opener transmitter 433.92MHz fixed code

Universal 433mhz remote control for SEAV TXS1,TXS2,TXS3,TXS4,TXS6,SEAV BE HAPPY S1,HAPPY S3,BE SMART S2

Specifications:

Voltage: DC12V (27A battery a including) Frequency: 433.92MHz Code:Fixed code Emission Distance: 50 to 100 m (proof) The encoding type: self Copy Works with 99.99% Fixed code or EV1527 Learning code. Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products

Compatible model:

SEAV 433.92mhz fixed code SEAV BE SMART S2 SEAV BE SMART S4 SEAV BE GOOD S3 SEAV BE-HAPPY-S1 SEAV BE-HAPPY-S2 SEAV BE-HAPPY-S3 SEAV TXS 1,TXS 2 SEAV TXS 3,TXS 4 SEAV TXS 6 Only compatible with the remote control model in the list. Other models are not compatible Pls kindly note,we only sell the replacement remote,not the original one

Copy method

Step 1 -delete the existing code of our remote duplicator 1)Click and Hold Lock(A) and Unlock(B) buttons together - Led will flash 3 times 2)Keep holding lock (A)button and release unlock(B) button 3)Keep holding lock(A) button and push unlock (B)button 3 times, Led will start flashing Non-stop Step 2 - clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through. Step 3. Resume the previous code of our remote duplicator If you carelessly delete the code of remote duplicator, how to do get the memory? Just follow the bellows : Press keys C (light) and D(mute) at the same time, until the LED keeps flashing quickly. Note: 2-key remote duplicator does not have this function. Note:Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.