Key Features:
20x the powre, improving the link quality and coverage of certified WLAN devices
2.5dB ultra-low noise
Wide 6V to 16v operating input voltage range
working with certified IEEE 802,11 b/g/n wireless Lan devices
Simply plug and play, no software is required
Specification:
Frequency range : 2.4~2.5Ghz
Operating voltage : 6~16V
Receiving gain: 10dB +/- 1
Transmission gain : 13dB +/- 1
Input trigger power : Min 3dBm Max : 20dBm
Maximum output Power : 36dBm (4W)
EVM : 3%@28dBm 802.11g 54Mbps OFDM 64QAM BW 20Mhz
DC supply current : 435mA@pout 28dBm 9V
Noise figure: <2.4dB
TX/RX switch time delay : 1us
LED indicator : Transmitter : Green, Receiver : Red
Operating ambient temperature : -40 deg +70 deg
operating humidity : up to 95% rel. humidity
Dimension : 82x50x21mm
Weight: 0.25kg net
Package include:
1x 4W WiFi Signal Booster,
1x 9V 1A Power adapter,
1x 20cm RG316 Cable,
1x 5dBi Antenna,
1x Manual
Performance indicators
Suite of products includes the following:
A 4W amplifier
1 20CM feeder (a threaded needle, an internally threaded bore)
An aperture 0.7MM power line
5DBI within a threaded hole antenna
4W WLAN transmission module is compatible with ZigBee,Bluetooth and time division duplexing method of WLAN.
Note:
1:Please don't power the band until you connect the antenna on the band.
2:Please don't connect with wireless Network Card( USB adapter)
3:If the router power is over than 20DBM(100MW), Please reduce the power below 20DBM(100MW)
Precautions:
1: This product is not suitable for the three-antenna router
2: This product is not suitable for most network cards, power can be very low
3: Router output power exceeds 20DBM please lower output power amplifier after the plus
4: Please connect antenna during recanalization power, or easily burn