"Hero Is Back" means the return of heroes. "Hero Is Back" pneumatic ratchet wrench has excellent quality and long service life. HIB-107 is a pneumatic ratchet wrench with maximum torque of 108N.M. The speed is 160 revolutions per minute. The weight is 1.15 kg. Tighten bolts with M10 bolt capacity. It is very suitable for maintenance in narrow space.
How to use?
Pneumatic ratchet wrench. It can be used as a manual ratchet wrench. That is to say, it can also use no gas. It's like a ratchet wrench. It can also be used as a pneumatic wrench for quick screw removal. The more difficult it is to disassemble the screw, the more quickly it can be disassembled by using the pneumatic function. The method of tightening the screw is the same. First, tighten the screw quickly by pneumatic force, and then apply proper force by hand.
①1/2 Inch Drive。
②Forward and reverse knobs。
③Alloy steel transmission shaft。
④Exhaust port。
⑤Plastic sheath。
⑥Motor switch
⑦Label
⑧Inlet hole, lubricating oil filling port。
①length：265mm。② height：46mm。③ width：40mm。
HIB-107 pneumatic ratchet wrench, maximum torque 108N.M. The speed is 160 revolutions per minute. The quadrilateral drive head is 1/2 inch, or 12.5mm. Pneumatic ratchet wrench is a plastic handle sheath on the handle. Even in cold winter, it doesn't feel too cold to hold hands.
1、Exquisite and beautiful
HIB-107 pneumatic ratchet wrench, exquisite workmanship. Beautiful appearance. Handle rubber sheath design to prevent slippage. It conforms to the design of artificial mechanics and is easy to use. Maximum torsion 108N.M. No-load speed 160 rpm.
2、Plastic handle sheath
Plastic handle sheath. Prevent hand skidding. Prevent oil corrosion. Even in the cold winter, it doesn't feel too cold to hold the handle.
3、Forward and reverse knobs
HIB-107, pneumatic ratchet wrench. Positive and reverse can be adjusted by knob. It is very convenient to remove and top the screw. Convenient adjustment of forward or reverse
4、1/2 Inch Drive
The driving head of pneumatic ratchet wrench. The square head is 1/2 inch, or 12.5mm, on the opposite side. Suitable for sleeve of common type.
5、Metal filter
Metal filter. Prevent debris, dust, particles and other impurities into the cylinder, protect the cylinder from damage.
6、Side vent
Side vent. HIB-107 pneumatic ratchet wrench. The exhaust hole is on the side of the pneumatic ratchet wrench. When working, air is discharged through side vents. If lubricating oil is added, lubricating oil will also be discharged from the vent along with the air.
