Blade material: super hard high carbon steel
Handle material: ABS engineering grade material
Weight: 370g
Use function: grafting / pruning two in one
Equipped with three types of blades, as shown below
Professional grafting tool
Step1:
Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant.
Take care to ensure that the groove is cut in the stock plant.
Stpe2:
Slide the donor stem into the groove of the stock plant, matching the cut surfaces an closely as possible. If the stock and donor plant are not the same size. Match on the side only.
Step3:
Place sterilizing material around the join, and bind with type, the sterilizing material will protect against bacteria and weather conditions.
Step4:
Use the pruner to cut useless branches from the plant.
Step5:
The grafting tool with “V&U&Ω” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
CAUTION
1. Keep out of reach of children.
2. Do not use on dry or old hard wood.