0 Piece,Product Price: US $ 0
Quantity(Piece/Pieces) | 1 ~ 1000 | >1000 |
Est. Time(days) | 7 | To be negotiated |
If you finish the payment today, your order will ship out within the delivery date.
Air Angle Grinder type BR - 8200, small size, light weight, high speed, yaw small, large torque, lightweight and comfortable design, fitting in your hand, suiting for handheld operation for a long. safety trigger to prevent sudden start, easy to operate, stable quality, suitable machinery operation in different consumables, vehicles, molds, rubber and other high precision surface grinding operations quickly.
Tool parameters:
1. No load speed: 25000RPM
2. Weight (NW): 0.35kg Package weight (GW): 0.45kg
3. Collet Size: 3mm / 6mm (1/4, 1/8)
4. inlet : 1/4
5. Pressure: 0.63Mp Average air consumption: 4cfm
6. Package Size: 21.5 * 9 * 5cm
Precision parts processing : Parts is operated by CNC machine , according to different process requirements with a choice of accessories for the top core grinder, honing machines, internal grinder, cylindrical grinder, and ensure parts tolerances requirement of concentricity or coaxial , bore or diameter , length, surface finishing . it ensured the tool long life and precision as complicated manufacturing processes, high cost, high precision. it is suitable for long-fine grinding operations.
High-quality materials Accessories: DuPont materials with importing high-speed bearing and wearable fan
Reasonable heat process: cylinder, chuck, shaft are more resistant and durable.
"Tools Maintenance Manual ''
To make your air tools can long maintain a good working condition, follow the right tools for maintenance and repair.
♣ use proper air pressure
Please use the required pressure in the pressure 6.0-8.0KG / CM2 range or the instructions on the gas. If the pressure is too low, then the efficiency of the tool will be significantly reduced or even not work properly. If the pressure is too high, although you can make to improve the efficiency of the tool, but it is easy to damage the internal parts and shorten the life of the tool.
♣ use of air filters
Compressed air moisture, dust, rust and other foreign matter is the main cause of premature aging parts of pneumatic tools. So the installation of a filter is required. Foreign matter in the air filter, providing clean, dry gas as a tool. Filters have enough traffic, and should always be clean, otherwise it will affect the normal flow due to lack of work. In addition, the air compressor is working for some time, the interior will accumulate large amounts of water must be discharged periodically to ensure gas drying.
♣ tool lubrication
All pneumatic tools must be properly lubricated regularly in order to ensure the normal long-term work. Proper lubrication is through the "three combination" means (water-oil cell) to achieve. When the airflow through the grid of water and oil, the lubricating oil will be atomized oiler, and selection of the oil is also important. Using an incorrect tool lubricant but it will cause damage to the general use of pneumatic tools or special lubricants SAE # 10 oil. Do not use thick oil. No water and oil as the grid system, the work tools before and after each intake port drip 3-4 drops of oil or fuel in the work of pre-designed holes, screws will spin out, after locking can be injected into the lubricant.
$15.89~19.86
Min. Order:5