Huepar Self-leveling Vertical & Horizontal Lasers Green Beam Cross Line Laser Level 150 Degree 510nm Nivel Laser For Outdoor Use
Specifications:
Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 510nm
Leveling Accuracy: ±2mm/10m(±1/13 In/33 Ft)
Leveling/Compensation Range: 4°±1°
Leveling Time: 3s
Working Distance (Line): 45m/150Ft (150 LUX)，up to 60m with detector
Operating Time: Normally 4 - 8 hours with all laser beams on
Spread Covers: H130°/ V150°
Power Source: 4×˝AA˝ , >1500mA （No battery included )
IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough
Operation Temperature Range: 14℉- 122℉(-10℃–＋50℃)
Storage Temperature Range: -4℉- 158℉(-20℃–＋70℃)
Size: 9.5x5.8x8.5cm (3.74"x2.28"x3.35")
Warning:
Avoid direct exposure of the laser beam to the eyes.
Items in the Package:
1* Huepar Box-1G green laser level ( Not including battery )
1* 180 degree Magnetic pivoting base
1* Green Target plate
1* Pouch
1* Multi-language User's Manual
Features:
-
RUGGED FOR OUTDOOR USE: Full-time pulse mode allows for good outdoor visibility up to 150ft/45m at full brightness for maximum visibility. Osram green laser maintains consistently high performance in ambient temperatures as low as 14°F /-10°C
-
H&V SWITCHABLE Function: One button operation makes it easy to select Crossed lines, Horizontal or Vertical line. Short press the button once each when you want to switch the lines between horizontal and vertical. 4*AA alkaline batteries power this level for up to 4 hours of continuous use with both green beams on.
-
PROFESSIONAL ACCURACY: ± 2mm/10m(± 1/13 In./33 Ft), bright Class II laser 510nm wavelength, protected by whole TPR soft rubber design, makes Huepar laser levels withstand the impacts, wear, and shocks of a professional job site. GOOD JOB SITE DURABILITY.
-
VERTICAL BEAM SPREAD COVERS 150°+: An expansion angle of 150°+ easily projects a vertical line from the floor to the ceiling. The Portable Size makes it easy to carry and pack.
-
WARRANTY:Customer can enjoy 12 months limited warranty but up to 24 months longer warranty if you become a royal customer through the product registration (Offered on the package box).
Germany Osram Green Laser Technology
Adopt Osram's laser unit, wihch is the best green laser unit in the word at present from world.
Green laser is 2 times brighter than red laser with the same light source. still accurate and clear under the sun, available for outdoor using.F
Two modes of use
➤Self-leveling mode:
Unlock the pendulum, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).
➤Manual mode:
Lock the pendulum, you can （use tripod or other bracket ）place the laser tool at various angles to project non-level straight laser lines. Slashes can be projected.The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.
Three line switching functions:
➤Each time the power button is pressed once, the laser tool projects horizontal lines, vertical lines, and cross lines in sequence.
➤130° cover horizontal line and 150° vertical line (H130°/V150°)
Pulse Mode:
➤Unlock the pendulum, press and hold the power button (for about 5 seconds) to turn on the pulse mode, then turn it on red.
➤When outdoor work is required (the receiver needs to be purchased separately), the laser receiver LG510 can receive pulses.
➤The receiver frequency is 10khz and the Huepar brand is the best pairing.
Various Kinds of Fixing Method:
➤Strong Magnetic L mount with triop thread can attaches the laser to any steels easily, turning around 180-degree as you like.
➤It can also accepts a standard tripod screw to do height adjustment.
Power ON / OFF:
➤How to power ON: Short press the power key or slide locking switch to turn the laser tool ON.
➤How to switch the line: After power on, short press the power switch once a time,the laser tool will project horizontal line,vertical line and cross line in turn.
➤How to turn the pulse mode ON: After power on,long press the the power key,when the blue light is on,the pulse mode is on.
➤How to power OFF: Lock the pendulum before short pressing the power button to turn the laser tool OFF.
The laser tool can help you easier on Home Decoration, Partition Wall Construction,
Chandelier Installation, Alignment of Drilling Positions, Stair Handrail Installation, Pictures Hanging Design, Laying out Tile,
Windows Construction etc.
