Feature
1. Adopt programmable PID temperature control technology, the most high-precision PID implant procedures, high-speed track testing machine gun and high suction tin soldering station the actual temperature, and calibration. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
2.With suction tin gun and high-frequency welding station function, two kinds of features intelligent recognition interchangeable. Need to use high-frequency welding units handle the suction gun unplugged, connect the high-frequency welding units handle, machine intelligence to identify and read high-frequency welding table once the temperature setting parameters. If you need to exchange suction tin gun, the high-frequency welding units handle removed, connected to the suction gun handle, the machine automatically identify the suction tin gun temperature parameters.
3.With suction pen function, auxiliary remove IC.
4. Anti-static design, prevent static electricity or leakage damage components.
5. Transformer isolated power supply to the heating element, and removing the high-frequency welding units handle or suction tin gun handle stop to the heating element power supply, safe and reliable.
6.Built-in vacuum, strong suction, no external vacuum system, easy to carry.
7.The machine is designed with the following powerful features of human nature.
8, Tin suction nozzle and a specially designed heat pipes, solder in the molten state can be suction filter, without regular maintenance, high efficiency.
9, The use of heat-resistant silicone hose, to prevent contact with the heating element and damage.
10, The internal use SMT dual-panel manufacturing process, process neat, clear signal flow, the machine further enhance stability and security performance, can adapt to harsh environments.
A, Celsius / Fahrenheit temperature display function
To meet the market needs of different regions and design temperature display mode, you canselect according to customary interest.
B, Sleep function
The machine automatically detects the status of their work, in the absence of use, when at rest,reaches the set sleep time, high-frequency welding Taiwan temperature or suction guntemperature automatic cooling to 200 ℃ into hibernation, which can effectively prevent tipoxidation, extending the tip life, energy and environmental protection. Sleep time can be set in the range: 1-99 minutes, in steps of 1 minute, the user can set according to usage, such as iron does not need to sleep the sleep time can be set to ---.
Wake-sleep methods
a, shake a few iron handle / button once sniffing a red switch.
b, press any key.
c, turn off the power switch on again.
C, Auto-off function
After the machine into hibernation, the program start time, in the set auto-off time not wake dormant, the machine will automatically shut down, saving and environmental protection.Automatic shutdown time setting range: 1-99 minutes, in steps of 1 minute. Such as automatic shutdown function does not require the automatic shutdown time is set to ---.
D, The password function
Enter function parameter setting need to enter the correct password before allowing the change function parameters, preventing the operator changes affect operating results.
E, Digital temperature correction
Adapted to the environmental impact or replace heater, iron top parts caused by iron temperature and display the deviation, can be corrected by this function.
F, Temperature linear correction
Linearity deviation caused by the replacement of the heating element, can be corrected by this function.
Product introduction
1 Full-new environment-protect material and exclusive mold opening;
2 With high frequently vortex for the temperature’s faster raise up and return,resolve the large and complex solder joint easier;
3 Fixed iron sleep time for 1~99 minutes & auto shut off for 1~30 minutes;
4 Patch high-precision double-sided panel process;
5 Password lock for data security;
6 With 90W high frequency soldering station;
Only 2 steps to remove the filter
Warm tips:
1. To remove the filter as far as possible to keep the gun tilt down, pick up and keep the silicone cap down, as shown A;
2. Hold the filter slightly to the top of the rear gripper, and slowly pick it up and back, as shown B;
3. After the filter is picked up, the silicone cover gasket will stay in the gun,please carefully drop, as shown C;
4. The filter asbestos net is placed in the filter on the side close to the four card feet carefully, as shown D.
