ZY12PDN is on sale!
Note that there are two kinds of bare edition with USB port and without USB port.
The hardware protocol IC is used in the trigger of PD, and the compatibility is not comparable to that of the software scheme.
Maximum power support to 100W, excellent compatibility.
The version with USB adopts 5A high current PAL base with small internal resistance.
Large volume ceramic capacitor filter, TVS surge prevention and reverse connection, Japan ALPS light touch switch, pay attention to stability.
With USB welding position and 5.08 screw connection post welding position, it is convenient to make Type-C to DC connection.
Small size 15 mm wide * 30 mm long, welded DC line shrinkage tube can be used to fill your laptop with the PD mobile power supply.
ZY12PDG Industrial Class Instructions:
Industrial-class voltage withstanding positive and negative 20V between any two terminals, input voltage anti-reverse connection
Effectively prevent problems such as VBUS short circuit to CC burner during testing.
It is very suitable for testing the bare power supply module of the fixture by flying needle directly, but it does not need to be assembled to test.
Or DIY plugged fast decoy line, no hardware switch is not easy to change the voltage by mistake.
With 5A-EMARK line DIY, the maximum power is up to 100W, and the compatibility is excellent.
The hole spacing is 2.54 mm, which is convenient for welding needle row to be inserted into other motherboards.
